Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
File Name: Wave-Systems-Corp_EMBASSY-Tr_A02_R176110.exe
File size: 151.89 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 80513662d8b4766745417c6576fcee1e
Fixes & Enhancements
Fixes
- Fixed Wave TPM error if Visual C++ SP1 runtime library is installed on the system.
- Fixed problems when TPM is turned on and there is no fingerprint reader attached to the system.
Enhancements
- Not Applicable.
Important Information
NOTE:
1. This release no longer contains device drivers for devices such as TPM, SmartCard controller or fingerprint readers.
2. In order to ensure full functionality, individual drivers have been posted for these devices and must be installed separately.
Supported Operating Systems
Windows Vista, 32-bit
Windows XP
Installation instructions
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\73J3G". (Where '73J3G' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\73J3G" (where '73J3G' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Reboot will be required