Kioxia Phoenix M5 (PM5) (MU FIPS) (RI FIPS) B326 for model numbers KPM5WRUG7T68, KPM5WRUG3T84, KPM5WVUG3T84, KPM5WVUG1T92, KPM5WVUG960G, KPM5WVUG480G, KPM5WVUG7T68
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Kioxia Phoenix M5 (PM5) (MU FIPS) (RI FIPS) B326 for model numbers KPM5WRUG7T68, KPM5WRUG3T84, KPM5WVUG3T84, KPM5WVUG1T92, KPM5WVUG960G, KPM5WVUG480G, KPM5WVUG7T68
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
Fix1:
- When a refresh operation or error recovery event is detected on the targeted Block of Wear-leveling, the execution priority is changed to high, and a refresh or error recovery process is carried out.
- Fixed FW to determine the completion of the wear-leveling process correctly, then complete the Wear-leveling process.
Fix 2:
- A fix to avoid the FW hang condition when 04-44-DC occurs so that PLP will run even if the drive is performing emergency GC.
- Power-on timeout limit extension from 5 minutes to 30 minutes to allow the drive the maximum amount of time to perform emergency GC to also prevent this assert.
Fix 3:
- The New FW can monitor and normalize the free area unbalance among the bank groups. This FW will compare the number of free blocks among the multiple bank groups and will control the data source and data destination when garbage collection is activated.
Read MoreFix1:
- When a refresh operation or error recovery event is detected on the targeted Block of Wear-leveling, the execution priority is changed to high, and a refresh or error recovery process is carried out.
- Fixed FW to determine the completion of the wear-leveling process correctly, then complete the Wear-leveling process.
Fix 2:
- A fix to avoid the FW hang condition when 04-44-DC occurs so that PLP will run even if the drive is performing emergency GC.
- Power-on timeout limit extension from 5 minutes to 30 minutes to allow the drive the maximum amount of time to perform emergency GC to also prevent this assert.
Fix 3:
- The New FW can monitor and normalize the free area unbalance among the bank groups. This FW will compare the number of free blocks among the multiple bank groups and will control the data source and data destination when garbage collection is activated.
Version
B326, A00
Release date
23 Apr 2024
Download Type
Firmware
Category
SAS Drive
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: SAS-Drive_Firmware_7FV43_WN64_B326_A00.EXE
File Size: 12.11 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
16df8e56a32c053ea9d8b56f42c3eff5
SHA1:
0c1a35691a71031030dbb0b6b1067dfe71488fd9
SHA-256:
ccc74b70930d438068c56b557e3a584ddf4aac9f5a9b8bf2243b544ff4be02dd
File Format: A GnuPG file which contains a cryptographic signature
File Name: SAS-Drive_Firmware_7FV43_LN64_B326_A00.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
21253d11dfcc7073b0524103dab1510b
SHA1:
5d1e0b11bbf8355e4a2645f8a07216b1f3f5bfb7
SHA-256:
004c7a0da1d6363fa9143520854499f447b8b1cb2bfbe1cbd3fe9166b2a017c5
File Format: Update Package for Red Hat Linux
File Name: SAS-Drive_Firmware_7FV43_LN64_B326_A00.BIN
File Size: 7.59 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
d67c5cd63536dcece825143041227672
SHA1:
ab3190999a5ba49c0a40da07ab131d532cd529ee
SHA-256:
4ca67610e9b9faf717a4d3312bb04e71330990dc2b443c40533dbf9f1a458b9a
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Novell SuSE Linux ES 11
Windows Server 2008 x64
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Windows Server 2012
Not Applicable
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Ent Linux 5
Red Hat® Enterprise Linux 8
Red Hat Enterprise Linux 9
Windows Storage Server 2012 R2
Novell SuSE Linux ES 10
SUSE Linux ES 12
SuSE Linux ES 15
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2003
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2008 R2
Windows Storage Server 2012
Windows Server 2016
Windows Server 2003 x64
Applies to
Toshiba Phoenix M5 MU 1920GB SSD SAS12 2.5 512e FIPS
Model Number: KPM5WVUG1T92
Regulatory Model Number: KPM5WVUG1T92
Vendor PN: SDFBD75DAB01
Toshiba Phoenix M5 MU 3840GB SSD SAS12 2.5 512e FIPS
Model Number: KPM5WVUG3T84
Regulatory Model Number: KPM5WVUG3T84
Vendor PN: SDFBD74DAB01
Toshiba Phoenix M5 MU 480GB12Gbps SAS 2.5 512e FIPS-140
Model Number: KPM5WVUG480G
Regulatory Model Number: KPM5WVUG480G
Vendor PN: SDFBD77DAB01
Toshiba Phoenix M5 MU 7.68TB12Gbps SAS 2.5 512e FIPS-140
Model Number: KPM5WVUG7T68
Regulatory Model Number: KPM5WVUG7T68
Vendor PN: SDFBD73DAB01
Toshiba Phoenix M5 MU 960GB SSD SAS12 2.5 512e FIPS
Model Number: KPM5WVUG960G
Regulatory Model Number: KPM5WVUG960G
Vendor PN:
Toshiba Phoenix M5 RI SSD FIPS 3840GB 2.5 SAS 12Gbps 512e
Model No KPM5WRUG3T84
Regulatory Model No: KPM5WRUG3T84
Vendor PN SDFBE74DAB01
Toshiba Phoenix M5 RI SSD FIPS 7680GB 2.5 SAS 12Gbps 512e
Model No KPM5WRUG7T68
Regulatory Model No: KPM5WRUG7T68
Vendor PN SDFBE73DAB01
Installation instructions
Dell Update Package instructions for Windows Dup:
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware__LN__A00.BIN " from the shell.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware__LN__A00.BIN.Sign.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware_
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware_
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.