Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
File Name: 7537A04_ZPE.exe
File size: 3.85 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 0dbb4696cb3af80380c1fec3c6ee9cc9
SHA1: 78879372bb11cdb3d53d69ff0edbd4c15a1e09fa
SHA-256: 006b855a79f1dd59cd50b8b81d52f102dc0cd9b1f68bf6dc5ef4a9b70c4d9862
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 7537A04.exe
File size: 10.24 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 2920059c5a27d1556882112ab2291be6
SHA1: d5daa80ddb11369efc02d954fac7a067824164dc
SHA-256: d1f04a2404076320811765bffe561a5fa747cddaed140194a886859e1e6e3788
Fixes & Enhancements
Fixes:
- Fixed iRST support under 8G partition.
Enhancements:
- N/A
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears,click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment,if Legacy Boot mode
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3.Run the file by typing copied file name where the executable is located.
4.DOS System will auto restart and update BIOS while system startup screen.
5.After BIOS update finished,system will auto reboot to take effect.
Run the BIOS update utility from DOS environment,if UEFI Boot mode with Load Legacy Option disabled
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then go to BIOS Setup by pressing F2 and go to Boot_Boot List Option.
3.Change UEFI to Legacy of Boot List Option.
4.Go to Exit_Exit Save Changes and reboot system.
5.Press F12,then Select USB Storage Device and Boot to DOS prompt.
6.Run the file by typing copied file name where the executable is located.
7.DOS System will auto restart and update BIOS while system startup screen.
8.After BIOS update finished,system will auto reboot.
9.Go to BIOS Setup by pressing pressing F2 and go to Boot_Boot List Option.
10.Change Legacy to UEFI Boot Option.
11.Go to Exit_Exit Save Changes and reboot system
--------------------------------------------------------------------------------
Note 1:You will need to provide a bootable DOS USB key.This executable file does not create the DOS system files.
Note 2:Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required