DellEMC OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC) v1.1.1
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.OMIMSWAC provides a simplified solution to IT administrators to efficiently manage the following:
- Dell EMC PowerEdge servers running on supported Windows Operating Systems.
- Azure Stack HCI clusters based on AX nodes or Storage Spaces Direct Ready Nodes from Dell EMC.
- Microsoft failover clusters created with Dell EMC PowerEdge servers.
View overall Health, Hardware inventory, and iDRAC inventory of nodes including component-level information of all supported Dell EMC platforms.
Provides Update Compliance reports against Dell EMC verified update catalogs and notifications for new catalog versions.
Support for different baselines in OMIMSWAC when connected to the Internet:
- Dell EMC Enterprise Catalog for PowerEdge Servers and clusters containing PowerEdge servers.
- Dell EMC Azure Stack HCI Solution Catalog for Dell EMC Solutions for Microsoft Azure Stack HCI.
- Dell EMC MX Solution Catalog for PowerEdge MX Modular.
Support for Local baselines created using Dell EMC Repository Manager (DRM).
Update PowerEdge Servers against baseline – BIOS, driver, firmware, and/or Systems Management Application.
Cluster-Aware Updating against validated baseline (BIOS, driver, firmware, and/or Systems Management Application) for PowerEdge server-based Failover cluster and Dell EMC Solutions for Microsoft Azure Stack HCI.
View iDRAC information of PowerEdge servers. For out-of-band management, you can directly launch the iDRAC console from Windows Admin Center.
Availability of OMIMSWAC extension localized in English, French, German, Spanish, Simplified Chinese, and Japanese languages.
- Dell EMC PowerEdge servers running on supported Windows Operating Systems.
- Azure Stack HCI clusters based on AX nodes or Storage Spaces Direct Ready Nodes from Dell EMC.
- Microsoft failover clusters created with Dell EMC PowerEdge servers.
View overall Health, Hardware inventory, and iDRAC inventory of nodes including component-level information of all supported Dell EMC platforms.
Provides Update Compliance reports against Dell EMC verified update catalogs and notifications for new catalog versions.
Support for different baselines in OMIMSWAC when connected to the Internet:
- Dell EMC Enterprise Catalog for PowerEdge Servers and clusters containing PowerEdge servers.
- Dell EMC Azure Stack HCI Solution Catalog for Dell EMC Solutions for Microsoft Azure Stack HCI.
- Dell EMC MX Solution Catalog for PowerEdge MX Modular.
Support for Local baselines created using Dell EMC Repository Manager (DRM).
Update PowerEdge Servers against baseline – BIOS, driver, firmware, and/or Systems Management Application.
Cluster-Aware Updating against validated baseline (BIOS, driver, firmware, and/or Systems Management Application) for PowerEdge server-based Failover cluster and Dell EMC Solutions for Microsoft Azure Stack HCI.
View iDRAC information of PowerEdge servers. For out-of-band management, you can directly launch the iDRAC console from Windows Admin Center.
Availability of OMIMSWAC extension localized in English, French, German, Spanish, Simplified Chinese, and Japanese languages.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- You can access OMIMSWAC from the Windows Admin Center (WAC) console after you log in to the WAC using gateway user
credentials without admin privileges.In previous release, access to OMIMSWAC from the WAC console was denied if you logged into the WAC using gateway user credentials without admin privileges.
- Allows OMIMSWAC to retrieve inventory information for clusters connected using Single-Sign-on.
In previous release, retrieving inventory information failed when a cluster was connected by using Single Sign-on authentication and WAC became unresponsive.
- Allows generating compliance report for target nodes or clusters connected using a password that contains certain special
characters.In previous release, compliance generation failed when a server or cluster was connected using a password that contains special characters such as double-quote, grave accent and semi-colon.
Enhancements:
- Support for PowerEdge XE2420 Edge server with iDRAC firmware 4.00.129.00 or newer.
- Support for Microsoft Windows Admin Center version 2007.
- Resetting of CauClusterRole parameter to allow the self-updating functionality of the specified cluster after the Cluster Aware Updating (CAU) operation is complete.
Read More- You can access OMIMSWAC from the Windows Admin Center (WAC) console after you log in to the WAC using gateway user
credentials without admin privileges.In previous release, access to OMIMSWAC from the WAC console was denied if you logged into the WAC using gateway user credentials without admin privileges.
- Allows OMIMSWAC to retrieve inventory information for clusters connected using Single-Sign-on.
In previous release, retrieving inventory information failed when a cluster was connected by using Single Sign-on authentication and WAC became unresponsive.
- Allows generating compliance report for target nodes or clusters connected using a password that contains certain special
characters.In previous release, compliance generation failed when a server or cluster was connected using a password that contains special characters such as double-quote, grave accent and semi-colon.
Enhancements:
- Support for PowerEdge XE2420 Edge server with iDRAC firmware 4.00.129.00 or newer.
- Support for Microsoft Windows Admin Center version 2007.
- Resetting of CauClusterRole parameter to allow the self-updating functionality of the specified cluster after the Cluster Aware Updating (CAU) operation is complete.
Version
1.1.1, A00
Release date
12 Aug 2020
Download Type
Applications
Category
Systems Management
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
File Format: Extracts files directly to local disk
File Name: Dell_EMC_OpenManage_Integration_MS_WAC_1.1.1_312_A00.zip
File Size: 3.84 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f65220e3d9e1e828d01e66f07d293020
SHA1:
a43ecf863f3f29a3ca9cc3632ec46fe2a8eb3aec
SHA-256:
d807299dc49e9d27fbfb19b6ff8a15d09f894ee2aaa15a3fda246187fc589d80
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Windows Server 2012
Not Applicable
Windows Server 2012 R2
Windows Server 2019 LTSC
Windows Server 2016
Installation instructions
Dell EMC OpenManage Integration with Windows Admin Center can be installed through
-Microsoft Online nuget package feed.
-MS Nuget is now moved to Azure DevOps Artifacts.
-Offline or local package feed.
Note: Before you install Dell EMC OpenManage Integration extension in Windows Admin Center, ensure that you have logged into Windows Admin Center as a gateway administrator.
To Install Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the NuGet feed
-In the Windows Admin Center application, in the upper-right corner, select Settings.
-Under GATEWAY, click Extensions.
-In the Available extensions tab, the Dell EMC OpenManage Integration extension is listed.
-Select Dell EMC OpenManage Integration extension, click Install, and then click Confirm to confirm the changes and to install the extension.
To Install Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the local path or network file share
Download
-Click the Download File link to download the file.
-When the File Download window appears, click Save to save the file to your hard drive.
-Extract Files
-Browse to the location where the file is downloaded and double-click the new file to unzip the downloaded package.
-Specify the location to unzip the files.
-Click on the unzip button to extract files.
NOTE: The Dell_EMC_OpenManage_Integration_MS_WAC_1.1.1_312_A00.zip file contains the dell-emc.openmanage-integration.1.1.1.nupkg which is used to install OMIMSWAC integration with Windows Admin Center by using a local path or network share.
-In the Windows Admin Center application, in the upper-right corner, select Settings.
-Under GATEWAY, click Extensions.
-Select Feeds > Add
-n the Add package source window, enter the local path or network file share where you have extracted the extension.ZIP file.
NOTE: You must set read and write permissions to the local or network file location
-Click Add.
-The extension is now listed under the Available Extensions tab.
-Select Dell EMC OpenManage Integration extension, click Install, and then click Confirm to confirm the changes and to install the extension.
Dell EMC OpenManage Integration extension is now installed in the Windows Admin Center and is listed under Installed extensions.
OMIMSWAC can be upgraded in one of the following ways:
-Upgrade Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the NuGet feed
-Upgrade Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the local path or network file share
For more information refer to Dell
For more information refer Dell EMC OpenManage Integration with Windows Admin Center Installation Guide
-Microsoft Online nuget package feed.
-MS Nuget is now moved to Azure DevOps Artifacts.
-Offline or local package feed.
Note: Before you install Dell EMC OpenManage Integration extension in Windows Admin Center, ensure that you have logged into Windows Admin Center as a gateway administrator.
To Install Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the NuGet feed
-In the Windows Admin Center application, in the upper-right corner, select Settings.
-Under GATEWAY, click Extensions.
-In the Available extensions tab, the Dell EMC OpenManage Integration extension is listed.
-Select Dell EMC OpenManage Integration extension, click Install, and then click Confirm to confirm the changes and to install the extension.
To Install Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the local path or network file share
Download
-Click the Download File link to download the file.
-When the File Download window appears, click Save to save the file to your hard drive.
-Extract Files
-Browse to the location where the file is downloaded and double-click the new file to unzip the downloaded package.
-Specify the location to unzip the files.
-Click on the unzip button to extract files.
NOTE: The Dell_EMC_OpenManage_Integration_MS_WAC_1.1.1_312_A00.zip file contains the dell-emc.openmanage-integration.1.1.1.nupkg which is used to install OMIMSWAC integration with Windows Admin Center by using a local path or network share.
-In the Windows Admin Center application, in the upper-right corner, select Settings.
-Under GATEWAY, click Extensions.
-Select Feeds > Add
-n the Add package source window, enter the local path or network file share where you have extracted the extension.ZIP file.
NOTE: You must set read and write permissions to the local or network file location
-Click Add.
-The extension is now listed under the Available Extensions tab.
-Select Dell EMC OpenManage Integration extension, click Install, and then click Confirm to confirm the changes and to install the extension.
Dell EMC OpenManage Integration extension is now installed in the Windows Admin Center and is listed under Installed extensions.
OMIMSWAC can be upgraded in one of the following ways:
-Upgrade Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the NuGet feed
-Upgrade Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the local path or network file share
For more information refer to Dell
For more information refer Dell EMC OpenManage Integration with Windows Admin Center Installation Guide
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.