Download Files
File Format: This format consists of gnu zip files for software installation.
File Name: ata_piix-1.02c-rhel4-multiarch-3.tar.gz
File size: 318.86 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: f1a6f7e6db31f6f23045574e58bad9b2
Fixes & Enhancements
Fixes:
Fixes issue with DKMS 2.0.13 where the libata module won't be installed due to module versioning
Enhancements:
N/A
Important Information
This package provides an RPM and driver disk for the Red Hat Entperprise Linux 4 "Gold" release (2.6.9-5.EL kernel), for both the i386 and x86_64 architectures.
Supported Operating Systems
Installation instructions
Custom Instructions for ata_piix-1.02c-rhel4-multiarch-3.tar.gz:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
RPM Installation
1. Log in as the root user
2. At a command prompt, type "tar xzvf ata_piix-1.02c-rhel4-multiarch-3.tar.gz" to extract the files from the compressed archive
3. At a command prompt, type "cd ata_piix-1.02c-rhel4-multiarch-3"
4. Download the latest dkms RPM from support.dell.com, or install the one from the archive by typing "rpm -Uvh dkms-2.0.5-1.noarch.rpm". If you receive a message that a newer dkms is installed on your system already, proceed to the next step
5. At a command prompt, type "rpm -Uvh ata_piix-1.02c-1dkms.noarch.rpm" to install the device driver.
Using a Driver Disk to install Red Hat Enterprise Linux
1. Put a floppy disk into the floppy drive on your system
2. At a command prompt, type "dd if= of=/dev/fd0". The driver disk is now ready to use
3. Boot to your Red Hat Enterprise Linux 4 installation media in the system you wish to install. At the "boot:" prompt, type "linux dd" to start the installation process.
4. When prompted, put the floppy into the floppy drive and follow the onscreen instructions.