Dell HBA355i Front/Adapter HBA350i MX Controllers firmware version 24.15.10.00

Performing the Firmware Upgrade
===================================
1. Update the firmware version to this version using preferred method below (Windows DUP, Linux DUP).
2. Reboot for the new FW to take effect

Windows Update Package:
Download
1. From Agile, download the update package and save it to your
local hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Linux (RHEL/SLES) Update Package:
Download
1. From Agile, download the update package and save it to your
local hard drive.

Installation
1. Read over the release information presented by executing the
"./SAS-Non-RAID_Firmware_XXXXX_LN_XXXXX.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing "./SAS-Non-RAID_Firmware_XXXXX_LN_XXXXX.BIN" from the shell.
4. Follow the remaining prompts to perform the update.

IDRAC/LC
1. Download the Windows DUP Executable from Agile
2. Upload DUP to IDRAC or LC
3. Submit job and reboot the system

VMware/Ubuntu/PERCcli
1. Download the DUP from Agile to a local system
2. Extract the Payload files from the DUP
Extracted DUP > Common > Payload
3. Download and install the latest PERCcli version to your server if not already installed
4. Copy the DUP payload files to your server
5. Navigate to PERCcli folder
Windows - folder with perccli.exe
Linux - /opt/Megaraid/perccli
VMware - /opt/lsi/perccli
Note that PERCcli requires administrator privileges to run
6. Install the Firmware to your controller with the below command
perccli /c download file= \Path To\.bin
7. Reboot the system