Intel Optane Memory H10 with Solid State Storage Firmware Update
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the firmware for Intel Optane Memory H10 with Solid State Storage, Revision 7002.7050. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives. The firmware manages the functionality of the devices. This update fixes the issue where the system does not detect solid-state drive (SSD) after reboot.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Fixed the issue where the solid-state drive (SSD) stops responding.
- Fixed the issue where the drive displays an error of Inaccessible Boot Device due to different power state timings.
- Fixed the issue where no drive attached error message is displayed in low power mode.
- Fixed the issue where the SSD fails to increase the Unsafe Shutdown Count of the system, which causes an error.
Enhancements:
- Enhanced the capabilities of reporting debug.
Read More- Fixed the issue where the solid-state drive (SSD) stops responding.
- Fixed the issue where the drive displays an error of Inaccessible Boot Device due to different power state timings.
- Fixed the issue where no drive attached error message is displayed in low power mode.
- Fixed the issue where the SSD fails to increase the Unsafe Shutdown Count of the system, which causes an error.
Enhancements:
- Enhanced the capabilities of reporting debug.
Version
7003-7051, A00
Release date
17 Jan 2020
Download Type
Firmware
Category
Storage
Importance
CriticalDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: ZipPack External
File Name: Intel Optane Memory H10 with Solid State Storage 95K3W_ZPE.exe
File Size: 3.97 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
327caaac0eaa0454716c2f858610e42a
SHA1:
da27b5601220079c680bef26f74c630e2ed70fb5
SHA-256:
67cd57449ae0726989c7832bc8daefd1a4455e30c456b7f8a105e99c083da9cf
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
It is recommended that you back up the data in the system before performing this update. Do not interrupt your system during the firmware upgrade process. If the firmware upgrade process is interrupted, the solid-state drive may not function properly.
Supported Operating Systems
Windows 10, 64-bit
Applies to
Intel Teton Glacier 16G + 256G QLC PCIE NVME SSD w/Optane Memory
Intel Teton Glacier 32G + 512G QLC PCIE NVME SSD w/Optane Memory
Installation instructions
Note:
It is recommended to back up the data in the system and close all open applications. It is also recommended to connect the power cable if it is not a desktop and disconnect all external storage devices.
Firmware upgrade through the Windows utility
Download
1. Click Download File to download the file.
2. When download is complete, run the downloaded file to unzip to your drive.
3. The file explorer opens pointing to the directory containing the download package. Take note of the path.
Upgrade Procedure
1. Close all open applications and save your work before the firmware update process.
2. Go to the location where you have downloaded the package.
3. Run irmfuu_7.1.9_win64 as administrator.
A command prompt interface is displayed. Wait for the update to take place.
4. After the command prompt window closes, reboot your computer to complete the installation.
It is recommended to back up the data in the system and close all open applications. It is also recommended to connect the power cable if it is not a desktop and disconnect all external storage devices.
Firmware upgrade through the Windows utility
Download
1. Click Download File to download the file.
2. When download is complete, run the downloaded file to unzip to your drive.
3. The file explorer opens pointing to the directory containing the download package. Take note of the path.
Upgrade Procedure
1. Close all open applications and save your work before the firmware update process.
2. Go to the location where you have downloaded the package.
3. Run irmfuu_7.1.9_win64 as administrator.
A command prompt interface is displayed. Wait for the update to take place.
4. After the command prompt window closes, reboot your computer to complete the installation.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.