Intel SpeedStep, v.3.4, A17

Dual-Core Pentium-M processors are supported in single-core mode only; Intel SpeedStep cannot be used with the processor in dual-core mode. Setting single-core/dual-core is possible in the computer's BIOS Setup program, and must be done prior to installation of Windows 2000.

Hard Drive Installation (via WinZip) with Setup.exe File for INTEL_SPEEDSTEP_A17_R190149.EXE

Download

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Install

1.Double-click the new icon on the desktop labeled INTEL_SPEEDSTEP_A17_R190149.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R190149. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R190149 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.