Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: O9020A07.exe
File size: 9.22 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 6d9c79eba6047e632faf67ebe2ff6d8b
SHA1: 636000955eda50928cd31291f44a9f7f9706bed8
SHA-256: a47cbafee34f77169bd02d1ffd1ec22714723e57c8c0c8fd24cae2c5fe8b277a
Fixes & Enhancements
Fixes
- Addressed display port hot plug issue.
- Addressed BIOS load default issue.
- Addressed PCI express performance issue.
- Addressed wake on lan issues.
- Addressed a system hibernate issue when SSD password is set.
Enhancements
- Update ePSA to 4228.26.
- Update Intel PXE ROM to 1.5.50.
- Update Intel MEFW to 9.1.0.1120.
- Update Intel CPU micro code.
- Enhance BIOS password strength.
- Change the default to enable for multi-display in BIOS menu.
- Adding help descriptions for enable UEFI network stack in BIOS menu.
Important Information
In order to support Intel i7-4790(s)/i5-4690(s)/i5-4590(s)/i3-4150 processors, system is unable to downgrade ME FW since BIOS A07
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users).
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not createthe DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required