LSI 9202-16E, 9211-8I,9210-8I, SAS RAID CARD support SLES

SCGCQ00335285 - SAS2 IT - Phase 15 ? Power Condition Mode Page Shows SATA Drive Standby Timer is Enabled At Start of Day
SCGCQ00336579 - "Logical block reference tag check failed" message hit while deleting PI volume
SCGCQ00337293 - The wrong amount of data is transferred when INQ to VPD page 0x89 is received while a device is doing self-test or a format.
SCGCQ00342805 - SlotStatus updates to SES managed Enclosure may update incorrect slots
SCGCQ00336583 - SAS2:Phase 15:BGI is going into pending state
SCGCQ00338179 - Fault 8405 was being hit while disabling and enabling the phy to which secondary drive is connected with IOs active.
SCGCQ00338263 - SAS2 IT - Phase 15 ? Extra Bytes of Data Provided for REPORT LUNS SCSI Command with Allocation Length=0x10
SCGCQ00339568 - ASCQ is not set Correctly in Self-Test Results Log Page When SEND DIAGNOSTIC Fails for SATA Drive
SCGCQ00341355 - IOP: Timer interrupt handling checks incorrect range if the timeMax variable wraps arround
SCGCQ00342354 - Channel NVDATA 9211-4i phy order swapped
SCGCQ00342770 - PL Fault 0x620F when inquiry issued to Sata device while a background test is active.
SCGCQ00343026 - Write same to SATA drive with UNMAP=1 and Number Of Logical Blocks = 0 fails
SCGCQ00259959 - SDK: System hangs when phase 13 DDR3 library and miniDMA included.
SCGCQ00339801 - Fault 301B during power cycle test
SCGCQ00282792 - Event for BGI started ('2F') comes on initiating a CC on a BGI running volume.
SCGCQ00286991 - CREATE_HOT_SPARE(0x1D) RAID Action succedes even if the number of hotspares currently present in the RAID Configuration is 2.
SCGCQ00293362 - Remove power management control flags from Manufacturing Page 3
SCGCQ00299765 - SAS2 IT-Phase 14-SATL-'Additional Sense' incorrect for REQUEST SENSE wrt. state transition sequence Standby->Active->Stop
SCGCQ00320153 - PL: Incorrect bit used for configurable SMP Retries feature.in Man Page 17
SCGCQ00322414 - Gen2 ( Phase 15) : Build failing for the latest tipcode when build all command is issued.
SCGCQ00286353 - pl: TM: an Abort Task may time out with an Abort Task already outstanding at the device
SCGCQ00304954 - IO Unit Page 7 PCIe Speed value incorrect for controller running at 8GT/s with Phase 13.5
SCGCQ00298490 - (IOP-only) Reduced performance caused by detected memory errors.
SCGCQ00307583 - sas9206-16e_it_p.xml in the phase 14 package is missing the close to the
SCGCQ00300393 - ATA passthru command is issued to a direct attached SATA device before it is ready
SCGCQ00239295 - Inactive foreign volume information cannot be seen in SASBIOS when a native volume is deleted.
SCGCQ00321937 - Target IOs completing without any data transfer
SCGCQ00294621 - Task management request with Retransmit bit set may time out in target mode
SCGCQ00305959 - pl: Command timeouts after data overrun in target mode
SCGCQ00291445 - Unable to read 256 bytes of data from OEM specific drive carrier NVRAM
SCGCQ00307628 - DwsResetDef is unexpectedly modified to maximum value if Linear mode is utilized
SCGCQ00285772 - Gen2 FW: Phase 14 IR : Fault 8806( IFAULT_IR_IO_BUFFER_NEW_FAILURE_1 Null buffer pointer) while Pulling & Pushing R1 Volume
SCGCQ00322575 - No functional change -- improve debug string handing when building code
SCGCQ00323474 - Fixed a IR build error
SCGCQ00323744 - PL: DMD timer may be saved incorrectly.
SCGCQ00324746 - After a port reset the resync continues from the watermarked level,elasped time in storelib starts from 0s
SCGCQ00327280 - (IOP) Interrupt coalescing is disabled for non-zero MSIX vectors
SCGCQ00327523 - SAS2 IT - Phase 15 ? When SATA Drive is Moved to Idle Power Condition, ASC/ASCQ is Incorrect for REQUEST SENSE
SCGCQ00327531 - SAS2 IT - Phase 15 ? REQUEST SENSE's ASCQ is Incorrect When SATA Drive State Tranistion Happens (ie) Active->Standby->Stopped