Download Files
File Format: This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
File Name: Inspiron 2350 A02.EXE
File size: 12.64 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 25ae35ba28052e7f6281ab6dba764cea
SHA1: 96c37195082f9b5f45a6a67a78a9fcc7143a400e
SHA-256: 9bc275c7ba0c84ae771fa0be13641a2a5316c4ae06bd6913edf72419eb3c50de
Fixes & Enhancements
Modify Windows To Go behavior.
Important Information
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Press Yes to confirm the BIOS version you want to update and start BIOS Update process.
3. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOSUSB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" Option
3. Change "UEFI" to "Legacy" Boot Mode
4. Go to "Exit > Save Changes and Reset" and then reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, press Yes and then system will reboot to take effect
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot Mode" to change Boot Mode from "Legacy" to "UEFI"
9. Go to "Boot > Secure Boot Control" to change Secure Boot from "Disabled" to "Enabled"
10. Go to "Exit > Save Changes and Reset" and then reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Note3: Do not turn off power or interrupt BIOS update process during flashing BIOS
Supported Operating Systems
Installation instructions
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Press Yes to confirm the BIOS version you want to update and start BIOS Update process.
3. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOSUSB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" Option
3. Change "UEFI" to "Legacy" Boot Mode
4. Go to "Exit > Save Changes and Reset" and then reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, press Yes and then system will reboot to take effect
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot Mode" to change Boot Mode from "Legacy" to "UEFI"
9. Go to "Boot > Secure Boot Control" to change Secure Boot from "Disabled" to "Enabled"
10. Go to "Exit > Save Changes and Reset" and then reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Note3: Do not turn off power or interrupt BIOS update process during flashing BIOS
Reboot will be required