Dell iDRAC Service Module for Windows, v5.3.0.0
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.iDRAC Service Module (iSM) is a lightweight software service that better integrates operating system (OS) features with iDRAC and can be installed on Dell’s 14G or later generation of PowerEdge servers. iSM provides OS-related information to the iDRAC and adds capabilities such as LC log event replication into the OS log, iDRAC SNMP alerts via OS, Metric injection from operating system to iDRAC telemetry, iDRAC hard reset and remote full Power Cycle. iSM automates SupportAssist report collection process for iDRAC leading to faster issue resolution. iSM has very little impact on the host processor and smaller memory footprint than in-band agents such as Dell OpenManage Server Administrator (OMSA), thus expanding iDRAC management into supported host operating systems.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
*JIT-269167 : The ISM0058 message is logged in the OS log data four minutes after the following:
When iSM 5.1.0.0 is installed with iDRAC firmware 7.00.00.00 or later versions, all features are enabled and prerequisites
are met, the Redfish feature is disabled, and then iSM is restarted.
*JIT-267807 & JIT-269301 : When Redfish is Enabled on iDRAC, then you may have to wait up to 120 seconds to perform
any operations that are related to the Metric Injection (Host OS Telemetry) feature on iDRAC Service Module.
*JIT- 265249 : When you assign or unassign a dedicated hot spare drive, the software RAID alert message displays incorrect disk ID on Microsoft Windows operating system log and Lifecycle Controller log.
Enhancements:
* Software RAID configuration support to assign and unassign the global hot spare and dedicated hot spare on Microsoft Windows operating system.
*Enhancement to support the Metric Injection (Host OS Telemetry) feature with physical drives, logical drives, and Logical Processor Utilization on the Microsoft Windows operating system.
Supported operating systems:
Microsoft Windows Server 2022 Datacenter
Microsoft Windows Server 2022 Standard
Microsoft Windows Server 2022 Essentials
Microsoft Windows Server 2019 Datacenter
Microsoft Windows Server 2019 Standard
Microsoft Windows Server 2019 Essentials
Microsoft Windows 10 22H2 client
Microsoft Windows 11 21H2/22H2 client
Note: iDRAC Service Module 5.3.0.0 does not support PowerEdge R240, PowerEdge R340, PowerEdge T140, and PowerEdge T340 servers on Microsoft Windows Server 2022 operating system.
Note : iDRAC Service Module 5.3.0.0 supports client operating systems on Dell Precision R7920 and Dell Precision R7960
Read More*JIT-269167 : The ISM0058 message is logged in the OS log data four minutes after the following:
When iSM 5.1.0.0 is installed with iDRAC firmware 7.00.00.00 or later versions, all features are enabled and prerequisites
are met, the Redfish feature is disabled, and then iSM is restarted.
*JIT-267807 & JIT-269301 : When Redfish is Enabled on iDRAC, then you may have to wait up to 120 seconds to perform
any operations that are related to the Metric Injection (Host OS Telemetry) feature on iDRAC Service Module.
*JIT- 265249 : When you assign or unassign a dedicated hot spare drive, the software RAID alert message displays incorrect disk ID on Microsoft Windows operating system log and Lifecycle Controller log.
Enhancements:
* Software RAID configuration support to assign and unassign the global hot spare and dedicated hot spare on Microsoft Windows operating system.
*Enhancement to support the Metric Injection (Host OS Telemetry) feature with physical drives, logical drives, and Logical Processor Utilization on the Microsoft Windows operating system.
Supported operating systems:
Microsoft Windows Server 2022 Datacenter
Microsoft Windows Server 2022 Standard
Microsoft Windows Server 2022 Essentials
Microsoft Windows Server 2019 Datacenter
Microsoft Windows Server 2019 Standard
Microsoft Windows Server 2019 Essentials
Microsoft Windows 10 22H2 client
Microsoft Windows 11 21H2/22H2 client
Note: iDRAC Service Module 5.3.0.0 does not support PowerEdge R240, PowerEdge R340, PowerEdge T140, and PowerEdge T340 servers on Microsoft Windows Server 2022 operating system.
Note : iDRAC Service Module 5.3.0.0 supports client operating systems on Dell Precision R7920 and Dell Precision R7960
Version
5.3.0.0, A00
Release date
28 Nov 2023
Download Type
Applications
Category
Systems Management
Importance
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: An application
File Name: OM-iSM-Dell-Web-X64-5.3.0.0-3292_A00.exe
File Size: 21.68 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Application
To ensure the integrity of your download, please verify the checksum value.
MD5:
5c59043a4eb959d7c2479ba1ee9f1ed0
SHA1:
98ecf0cce1247f9009abf8441563b000fc336e64
SHA-256:
26c5cd89419a3c1e3fc8a933569766c0bfe17ee2aa0fa54616c4765b34dcce41
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Dell Technologies highly recommends reviewing this update to determine if it applies to your system and update to this latest version of iDRAC Service Module 5.3.0.0 during your next scheduled update cycle.
The update contains critical security fixes and changes to improve the functionality, reliability, and stability of your Dell system. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
The update contains critical security fixes and changes to improve the functionality, reliability, and stability of your Dell system. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Supported Operating Systems
Windows 11
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows 10, 64-bit
Applies to
iDRAC Service Module for Windows
Installation instructions
Download:
To download the iSM webpack file, complete the following steps:
1.Click Download option to download the webpack file.
2.When the file download window appears, click Save to save the installer webpack file to your hard drive.
Installation:
1. Extract the contents to a folder.
2. Browse to iSM\windows folder and double click iDRACSvcMod.msi.
To download the iSM webpack file, complete the following steps:
1.Click Download option to download the webpack file.
2.When the file download window appears, click Save to save the installer webpack file to your hard drive.
Installation:
1. Extract the contents to a folder.
2. Browse to iSM\windows folder and double click iDRACSvcMod.msi.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.