Dell Networking N3000 Series, Firmware Version 6.3.3.10
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Dell Networking N3000 Ethernet Switch can run as Access Router or Aggregation Router based on the Firmware downloaded and run. The Firmware N3000_BGPv6.3.x.x.stk provides BGP functionality and N3000_N2000v6.3.x.x.stk features WebUI, OpenFlow, iSCSI, GARP, GVRP, GMRP, Auto-VoIP, DVLAN, MVR, and MLAG. Only the listed features are mutually exclusive while other features exist in both the variants of the builds. Please note the feature requirement and select the Firmware to download and run on N3000 Ethernet switch. Please note that since the features present in one variant of the firmware does not exist in other variant, the configuration specific to those exclusive features will fail configuration migration when switching between the firmware variants on N3000 Ethernet switch.
New CPLD version 17 is available in release 6.3.3.9 and later (6.3.3.10) for both N3000 and N2000 Series switches. After upgrading the switches to FW v6.3.3.9 and later (6.3.3.10), the CPLD can be updated to version 17 from CLI using the command - 'update cpld'. To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update completes, the switch will reset on its own.
**Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.3.10 with CPLD Version 15 or 17 and attempt to downgrade to any prior FW version**
Downgrading N3000 and N2000 Series switches from firmware version 6.3.3.10 with the updated CPLD version 15 or 17 to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2 or B.6.3.32 (N3000_N2000vB.6.3.2.stk or N3000_BGPvB.6.3.32.stk) attached to zip file. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.3.10 Firmware" procedure.
New CPLD version 17 is available in release 6.3.3.9 and later (6.3.3.10) for both N3000 and N2000 Series switches. After upgrading the switches to FW v6.3.3.9 and later (6.3.3.10), the CPLD can be updated to version 17 from CLI using the command - 'update cpld'. To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update completes, the switch will reset on its own.
**Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.3.10 with CPLD Version 15 or 17 and attempt to downgrade to any prior FW version**
Downgrading N3000 and N2000 Series switches from firmware version 6.3.3.10 with the updated CPLD version 15 or 17 to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2 or B.6.3.32 (N3000_N2000vB.6.3.2.stk or N3000_BGPvB.6.3.32.stk) attached to zip file. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.3.10 Firmware" procedure.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
FIELD-2491-N-Series/6.3.2.7/CTP:loop is not detected in stack member unit.
FIELD-2441-N4032F/6.3.3.3/Trap is not generated for violation when port-security dynamic count is increased.
FIELD-2409-N4032/6.3.2.7/Interface flap when port configuration made via WebUI.
FIELD-2422-N-Series/6.3/Support password with special character.
FIELD-2421-N1524/6.3.2.6/Combination of DHCP-snooping, VLAN MAC-association and dynamic-arp-inspection not working as expected.
FIELD-2447-N2048/6.3.3.4/sFlow polling is not configurable from global configuration mode.
FIELD-2458-N4032/6.3.2.7/Switch crash with hapiBroadBfdCtrlTask.
Enhancements:
None
Please refer to the Release Notes included in the zip file for fixes and enhancements available in this release.
Read MoreFIELD-2491-N-Series/6.3.2.7/CTP:loop is not detected in stack member unit.
FIELD-2441-N4032F/6.3.3.3/Trap is not generated for violation when port-security dynamic count is increased.
FIELD-2409-N4032/6.3.2.7/Interface flap when port configuration made via WebUI.
FIELD-2422-N-Series/6.3/Support password with special character.
FIELD-2421-N1524/6.3.2.6/Combination of DHCP-snooping, VLAN MAC-association and dynamic-arp-inspection not working as expected.
FIELD-2447-N2048/6.3.3.4/sFlow polling is not configurable from global configuration mode.
FIELD-2458-N4032/6.3.2.7/Switch crash with hapiBroadBfdCtrlTask.
Enhancements:
None
Please refer to the Release Notes included in the zip file for fixes and enhancements available in this release.
Version
6.3.3.10, A31
Release date
03 Nov 2017
Download Type
Firmware
Category
Network, Ethernet & Wireless
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: N3000v6.3.3.10a31.zip
File Size: 104.41 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
b1c756ed5096dd10888dfb95fe23d63a
SHA1:
94d4109e9a7fbea4d171a0b0c760961518d75a3a
SHA-256:
3ceeb2292eff485716895384796b8773f256253e044b928d7ef08cb89e9ef20a
File Format: A text file containing customer friendly fixes and enhancements information
File Name: N3000ReadMev6.3.3.10a31.txt
File Size: 4 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
9c61498f6966ceb1495590e636024d2c
SHA1:
aa718e31f49a67b8dcd89f12d241608d93a68357
SHA-256:
2376b3eb67f3504610eb2ced9dd16cf0637aed25552ce4a65074ff2216d51857
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Fixes:
FIELD-2491-N-Series/6.3.2.7/CTP:loop is not detected in stack member unit.
FIELD-2441-N4032F/6.3.3.3/Trap is not generated for violation when port-security dynamic count is increased.
FIELD-2409-N4032/6.3.2.7/Interface flap when port configuration made via WebUI.
FIELD-2422-N-Series/6.3/Support password with special character.
FIELD-2421-N1524/6.3.2.6/Combination of DHCP-snooping, VLAN MAC-association and dynamic-arp-inspection not working as expected.
FIELD-2447-N2048/6.3.3.4/sFlow polling is not configurable from global configuration mode.
FIELD-2458-N4032/6.3.2.7/Switch crash with hapiBroadBfdCtrlTask.
Enhancements:
None
Please refer to the Release Notes included in the zip file for fixes and enhancements available in this release.
FIELD-2491-N-Series/6.3.2.7/CTP:loop is not detected in stack member unit.
FIELD-2441-N4032F/6.3.3.3/Trap is not generated for violation when port-security dynamic count is increased.
FIELD-2409-N4032/6.3.2.7/Interface flap when port configuration made via WebUI.
FIELD-2422-N-Series/6.3/Support password with special character.
FIELD-2421-N1524/6.3.2.6/Combination of DHCP-snooping, VLAN MAC-association and dynamic-arp-inspection not working as expected.
FIELD-2447-N2048/6.3.3.4/sFlow polling is not configurable from global configuration mode.
FIELD-2458-N4032/6.3.2.7/Switch crash with hapiBroadBfdCtrlTask.
Enhancements:
None
Please refer to the Release Notes included in the zip file for fixes and enhancements available in this release.
Applies to
Dell N3024
Dell N3024F
Dell N3024P
Dell N3048
Dell N3048P
Installation instructions
(1) Download the zip file - N3000v6.3.3.10a31.zip
(2) Extract the image file "N3000_N2000v6.3.3.10.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.3.10 Firmware.pdf" extracted from zip file.
(2) Extract the image file "N3000_N2000v6.3.3.10.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.3.10 Firmware.pdf" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting guideDrivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.