Download Files
File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
File Name: 22320-win2k-10819-1750.exe
File size: 60.79 KB
Fixes & Enhancements
MPT Windows Driver (SYMMPI) Release Notes v1.08.19
=================================
Changes From Version 1.08.18:
Functionality
========
None
Defect fixes
=======
- Added handling for getting a check condition on an OS issued request sense command (no SenseInfoBuffer).
- Change custom OEM IOCTL devPhysWidth back to an enumerated value, set on a device basis per Inquiry data.
Important Information
This driver release (version 1.08.19) is the initial supported driver for Local Update packages. This driver or later must be currently installed in order to use the Local Update packages. To update to the 1.08.19 driver, follow the instructions for 22320-win2k-10819-1750.exe.
Supported Operating Systems
Installation instructions
Custom Instructions for 22320-win2k-10819-1750.exe:
LSI Logic PCI SCSI/FC MPI Driver
This program creates a Windows 2000 driver diskette for the
LSI Logic SCSI controllers. You will need a formatted 3 1/2
inch floppy diskette for the following procedure.
1) Download the file to a directory on your hard drive. The
file downloaded is a self extracting executable.
2) Double click on the file to run the executable.
3) Click on the unzip button to extract files to the floppy.
Installing on a New Windows 2000 Server
---------------------------------------
1) Boot the system using the Windows 2000 CD. As the message
"Press F6 if you need to install a third party SCSI or RAID driver"
appears, press F6 immediately.
2) Within a few minutes, a screen appears that asks for
additional adapters in the system. Choose 'S'.
3) You are prompted for the driver diskette. Insert the LSI
Logic Windows 2000 SCSI driver diskette created above and
press Enter.
4) "Dell PERC 4/im | LSI Logic 1020/1030 Driver (Windows 2000)"
appears in the middle of the screen. Press Enter to load
the driver.
5) Press Enter again to continue installation process as usual.
Adding the LSI Logic SCSI Driver to an Existing Windows 2000 Server
-------------------------------------------------------------------
1) Boot the system to Windows 2000. The Found New Hardware
Wizard displays.
2) Select Search for a suitable driver and click Next to
continue.
3) Select Floppy disk drive, insert the LSI Logic Windows
2000 SCSI driver diskette created above and click Next to
continue.
4) Select "LSI Logic 1020/1030 Ultra320 SCSI Adapter" from
the floppy drive and click on Next.
5) The Found New Hardware Wizard screen appears once for
each SCSI channel present. Repeat steps 2 to 4 for each
time the wizard pops up to complete the installation of
the card.
6) To confirm driver installation, right click on My
Computer and select Manage. Click on Device Manager, then
click on SCSI and RAID controllers to see the newly added
LSI Logic SCSI controller(s) in the list.
Applies to
Ultra 320 SCSI Adapter Non-RAID