Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 5455A08.exe
File size: 6.44 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 8a6ae8575c871a0a1798be240f9ffe7c
SHA1: cb87d298eae3a19bcf72cbcc9bf1eefa25871596
SHA-256: 3260aa677beeb28dd3b7f1068b2580fb65b4593351a89c9f191bcfac98cd190a
Fixes & Enhancements
Fixes
- Added Excalibur feature.
Enhancements
- Not Applicable.
Supported Operating Systems
Installation instructions
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Reboot will be required
Applies to
Dell Inspiron 5455/5555/5755