Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell EMC Server BIOS PowerEdge T640 Version 2.15.1
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release highlights the Intel Purley Refresh IPU 2022.2 PV Reference Code version 622D07. For more information about specific items added and resolved in this BIOS version, see the Fixes and New and enhanced features sections.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- When the Memory Operating Mode option in the Memory Settings menu is set to MultiRankSpareMode, multi-bit memory errors are generated in the System Event Log (SEL) or Lifecycle log.
- The Transport Layer Security (TLS) certificate associated with the HTTPS URL is not effectively applied during the HTTPS boot operation. This issue is observed only when using the IPv6 protocol because it breaks the CVE-2021-21571 fix.
Enhancements:
- Updated the "Processor and Memory Reference Code" for the second-generation Intel Xeon Processor Scalable Family to IPU 2022.2.
- Updated the Processor Microcode to version 0x6E05 for the Intel Xeon Processor Scalable Family
- Updated the Integrate Purley Refresh PV Candidate Reference Code Version 622D07
- Updated SPS to SPS_E5_04.01.04.804.0 (IPU 22.2) for Purley Refresh.
Read More- When the Memory Operating Mode option in the Memory Settings menu is set to MultiRankSpareMode, multi-bit memory errors are generated in the System Event Log (SEL) or Lifecycle log.
- The Transport Layer Security (TLS) certificate associated with the HTTPS URL is not effectively applied during the HTTPS boot operation. This issue is observed only when using the IPv6 protocol because it breaks the CVE-2021-21571 fix.
Enhancements:
- Updated the "Processor and Memory Reference Code" for the second-generation Intel Xeon Processor Scalable Family to IPU 2022.2.
- Updated the Processor Microcode to version 0x6E05 for the Intel Xeon Processor Scalable Family
- Updated the Integrate Purley Refresh PV Candidate Reference Code Version 622D07
- Updated SPS to SPS_E5_04.01.04.804.0 (IPU 22.2) for Purley Refresh.
Version
2.15.1, 2.15.1
Release date
09 Aug 2022
Download Type
System BIOS
Category
BIOS
Importance
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: BIOS_JG8RW_WN64_2.15.1.EXE
File Size: 28.36 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
7fe96e37392d464be566f3aaa6f8c5d2
SHA1:
af81d91e6a0b9ad1e29808991709ebe933687fb5
SHA-256:
0eaf855260c7121fd086899f7b979a1ab6d2480898d586600b185a6c6b22c16d
File Format: A GnuPG file which contains a cryptographic signature
File Name: BIOS_JG8RW_LN64_2.15.1.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
ab0916cbc9cbca4bc3fc77f895a886f7
SHA1:
fdbc12c9be71c8e6aca394a9e3a13ef6c6ff6935
SHA-256:
89639dae689028a189bdc3b7dfc36e07e15a8c0a5e49438e9611ad9056ee1ea6
File Format: A self-extracting file for use in 64-bit machines
File Name: T640-021501.efi
File Size: 19.3 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains compressed content that can be executed from the EFI Shell or EFI Boot Manager. Download the file to the EFI partition on a removable media device. Insert the removable media, then reboot the system and run the program from the EFI Shell or EFI Boot Manager.
To ensure the integrity of your download, please verify the checksum value.
MD5:
64863fe811626cf0dd3c684cbcccca4c
SHA1:
e4b5210501c7343b3aaba4036552b34018f58bc2
SHA-256:
6e907fda07e4b7b9fa12291ee783eb197740743324b37d314934cfc8e560b581
File Format: An archive of PDF files to provide help and procedural information to the customers
File Name: T640_BIOS.2.15.1_RN.pdf
File Size: 262.79 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
To ensure the integrity of your download, please verify the checksum value.
MD5:
71928c90832a4a0f6a28e37165586a82
SHA1:
cd52e1bc4fe860c7b8c65d750f16fdef825da1dd
SHA-256:
d46554e9771ebd5566aa2944509116647556d80e5003542f9e5c048a34111201
File Format: Update Package for Red Hat Linux
File Name: BIOS_JG8RW_LN64_2.15.1.BIN
File Size: 23.42 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
d5ed40ef9cf18e870373dbdbfbaa303f
SHA1:
df73165e7e3675f5948bdb2be334bacfc7f3946b
SHA-256:
0df3786f32d2656b92e2f79cb0018b56e80db934f2e1c7f7c3cabdbe0d7dcb1d
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
When you try updating a BIOS version either under OS (by using an Update Package (DUP)) or under UEFI Shell (a .efi file), the system may take more time to complete the BIOS update process (in case of a system that has 14 TB memory, it takes around 30 minutes to complete the BIOS update process under Windows Server 2016). There are two ways to work around this issue:
- Use an out-of-band BIOS update method--IDRAC Graphical User Interface (GUI) or RACADM Command Line Interface (CLI) command.
- Physically reduce the memory capacity by removing a few memory modules (improves the speed of the BIOS update process), and then try again.
When you try installing one or more PCIe devices on the system and if the cards require more limited legacy I/O resources, then the system may adjust the legacy I/O resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0256 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up legacy I/O space.
- Go to System Setup and disable unused PCIe card to free up legacy I/O space.
When you try installing one or more PCIe devices on the system and if the cards require more MMIO resources, then the system may adjust the MMIO resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0134 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up MMIO space.
- Go to System Setup and enable the "Memory Mapped I/O above 4GB" option.
- Use an out-of-band BIOS update method--IDRAC Graphical User Interface (GUI) or RACADM Command Line Interface (CLI) command.
- Physically reduce the memory capacity by removing a few memory modules (improves the speed of the BIOS update process), and then try again.
When you try installing one or more PCIe devices on the system and if the cards require more limited legacy I/O resources, then the system may adjust the legacy I/O resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0256 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up legacy I/O space.
- Go to System Setup and disable unused PCIe card to free up legacy I/O space.
When you try installing one or more PCIe devices on the system and if the cards require more MMIO resources, then the system may adjust the MMIO resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0134 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up MMIO space.
- Go to System Setup and enable the "Memory Mapped I/O above 4GB" option.
Applies to
PowerEdge BIOS
Installation instructions
Dell EMC Update Package Instructions for EFI
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting guideDrivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.