Dell Latitude E5270/E5470/E5570 and Precision 3510 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : JGVN8

Importance : Critical

Version : 1.19.3, 1.19.3 Latest version Recommended version Latest and Recommended version

Release Date : 23 Oct 2018

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. The package is supported on Dell Latitude E5270, E5470, E5570, and Precision 3510 that runs Windows and DOS operating systems. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives, and other devices. This package contains update for CPU microcode to address Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 and CVE-2018-3640).

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Latitude_E5x70_Precision_3510_1.19.3.exe

File size: 13.77 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 58763e90e2cba34d3a30e461a9bb419b

SHA1: e8cb12af914685d76221b3466f5660f712500388

SHA-256: 38c5c13b72f9f1890570ad13f86ae7b8eacfa2fcea6022068e73a9d305d59f33

Download .EXE

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: Latitude_E5x70_Precision_3510_1.19.3.txt

File size: 19.75 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: 05fb844acd06aac318541da6593be7cc

SHA1: 874bec657c8cf8e65e5f6f86a131cbb8a096a8ce

SHA-256: a5c66b02f81750c252486abfabcd69faf6cfd3ec6a279d6495e97e72bc28a071

Download .TXT

Fixes & Enhancements

Fixes:
- Fixed the TPM startup error under TPM enabled condition when the system resumes from sleep mode.
- Fixed a potential issue where system stops responding when an incorrectly formatted password is entered at the BIOS Security Manager (BIOS pre-boot password) prompt.
- Fixed the issue where PCR7 (Platform Configuration Register) was unable to bind on TPM 1.2 system with Windows 10 operating system.
- Fixed the issue where monitors flicker erratically when connected to E-Port docking station.
- Fixed the issue where the system password screen does not prompt when the system boots with NVMe SSD.
- Fixed the issue where the system doesn't respond intermittently when entering BIOS setup page or boot menu with USB- C device.
- Fixed the issue where the system stops responding when Dell WD15 is connected or disconnected in BIOS.
- Fixed the issue where Monitor webcam flickers/lags with type-C dock/dongle.
- Fixed the issue where free fall sensor device is not found in Device Manager after resetting the BIOS to default settings.
- Fixed the issue where Hard Disk Drive (HDD) password is bypassed after shutting down the system.
- Fixed no video issue with switchable graphics disabled in BIOS.
- Fixed the issue where system stops responding at Dell logo when no USB type-C/thunderbolt device is attached.
- Fixed the issue where a large Dell logo and inappropriate menu is displayed in IntelAMT remote management.
- Fixed the issue where Wi-Fi gets disabled after removing the Dell WD15 in sleep mode.
- Fixed the issue where pressing the left, up and down arrow key launches Windows Calculator.
- Updated CPU microcode to address security advisory Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 & CVE-2018-3640).
- Updated Intel ME Firmware to address security advisories - INTEL-SA-00112 (CVE-2018-3628 CVE-2018-3629 CVE-2018-3632 ), INTEL-SA-00118(CVE-2018-3627), INTEL-SA-00125 (CVE-2018-3655), Intel-SA-00131 (CVE-2018-3643 CVE-2018-3644) & INTEL-SA-00141 (CVE-2018-3657 CVE-2018-3658 CVE-2018-3616).

Enhancements:
- Enable WSMT (Windows SMM Security Mitigation Table) security enhancement for Windows 10 Creators Update.
- Enhanced HDMI port signal output.
- Add BIOS option for user to select either the Integrated LAN MAC address or the BIOS Auxiliary (AUX) MAC addresss for the MAC passthrough feature when connected to a Dell USB RJ45 dongle, Dell Type-C RJ45 dongle, or Dell Dock.
- Added TPM PPI Bypass for Clear Command support.
- Updated Realtek USB LAN firmware.
- Updated Intel Graphic BIOS/GOP (Graphics Output Protocol).
- Updated SPI ROM part flash command configuration settings to protect and secure the flash process.

Installation instructions

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Run the BIOS update utility from Windows environment.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
DOS System will restart automatically and update BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.

Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes and reboot the system.

Dell Latitude E5270/E5470/E5570 and Precision 3510 System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to