Dell Command | Monitor

hi testing

Driver Id : K2XJ1

Importance : Recommended

Version : 10.6.0.87, A00 Latest version Recommended version Latest and Recommended version

Release Date : 28 Sep 2021

Download Type : Applications

Category : Systems Management

This package contains the Dell Command | Monitor application for Red Hat Enterprise Linux 8(64-bit) operating system. The Dell Command | Monitor software application enables remote management of client systems. It uses application programs to access the system information, monitor the status, or change the state of the system such as remotely shutting down the system.

Download Files

File Format: This format consists of gnu zip files for software installation.

File Name: command-monitor-10.6.0-87.el8.x86_64.tar.gz

File size: 8.55 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 5159a58f1fed7fca81168f7ac3dcd414

SHA1: dcde02ddd347f98304719332d4f47f7dd8007c70

SHA-256: 9fd40f2a28c696ee9a2479608e29d17b61ef15f41f8f9b1ed51b9ccd1db66f82

Download .GZ

Fixes & Enhancements

- Supports the ResetBIOSDefaults method.
- Supports the following new BIOS attributes:
1. Intel@ GNA Accelerator
2. Multiple Atom Cores
3. USB4 CM Mode
4. Onboard Unmanaged Nic
5. Enable Pre-Boot DMA Support
6. Enable OS Kernel DMA Support
7. PCIe Resizable Base Address Register (BAR)
8. OS Agent Requests
9. Enable Microsoft UEFI CA
10. Legacy Manageability Interface Access
11. Power-on-Self-Test (POST) Automatic Recovery

Installation instructions

Note: You can install Dell Command | Monitor in systems that run the Red Hat Linux operating system using the RPM package downloaded from www.dell.com/support/home. See Downloading Dell Command | Monitor at www.dell.com/support/home.

1. In the Linux command line interface, run the following command to extract contents from command_monitor-linux--.tar.gz.
tar -zxvf command_monitor-linux--_.tar.gz
The command_monitor-linux--_.tar.gz contains the following packages that must be installed in the following order:
a. omi-.ssl_.x64.rpm
b. srvadmin-hapi__amd64.rpm
c. command_monitor-linux--_.rpm
2. To install OMI, run rpm -i omi-.ssl_.x64.rpm
3. To install HAPI, run rpm -i srvadmin-hapi__amd64.rpm
4. To install Dell Command | Monitor, run rpm -i command_monitor-linux--_.rpm
5. To verify that the Dell Command | Monitor is installed in your system, run rpm -qa | grep command-monitor.

Dell Command | Monitor

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions