Dell PowerEdge C6320 HDD zoning configuration utility.

Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This tool is specific to an 2.5" HDD expansion config of PowerEdge C6320 product. It is to allow customer to assign HDD zoning configuration as their need.
Recommended

Check compatibility

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

V1.0 is inital release.
Read More

Version

V1.4, A00-00

Release date

13 Jan 2016

Download Type

Utility

Category

System Utilities

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: KT0F6-V104.exe
File Size: 398.5 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
34b1212c093e028e2a930dddf80c4de8
SHA1:
ca29799d4eb7d557e0832bba75663b940e050f72
SHA-256:
177b17429711f12878382a4bca12974e3dca387d94e9b253817b2b156fb71501

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
By running this tool, you may lose hard drive data.
This tool changes what drives are seen by what nodes.
It is very likely that you will have to rebuild RAID arrays.
Do not risk data unless you are certain that you know what you are doing.
CRD,BKPLN,HD,2,5,EXP
Window platform
execute PEC_6300_ZONE_UTL_1.4.exe

Controller setup:
If HDD controller is LSI2008, proceed directly to zoning step.
If HDD controller is H330 or H730 change controller to HBA mode before zoning step.
The controller can be changed to HBA mode by the following command using CLI:
perccli /cx set personality=HBA

If needed, to verify the current setting run the following command:
perccli /cx show personality

Zoning Step:
PEC_C6300_UTL_V1.4.exe -f 2 12 12

Reset controller configuration:
If HDD controller is LSI2008, then zoning process is complete. If HDD controller is H330 or H730 restore controller to RAID mode using the following command:
perccli /cx set personality=raid

Drivers help and tutorials