Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: XPS_9360_2.7.1.exe
File size: 10.69 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: f39ef9d1864f9a016479d10835935640
SHA1: 7feb8db1a5f58cd9ad5aac9c9127b050d9ff440d
SHA-256: 264e5eaaef102122317aa7735faa4c1fba0ea2b0b6a69bc49a699b229c88351d
Fixes & Enhancements
Enhancement:
1. Improve startup stability when the RTC battery voltage is low
2. Support eGFX devices
Important Information
1. When the system is upgraded to BIOS version 2.5.1 or later, the system will not allow downgrading to BIOS version 2.4.2 or any previous version.
2. Be sure to update to Thunderbolt 3 Firmware version 4.26.13.001 or later before upgrading to BIOS version 2.7.1 or later.
Supported Operating Systems
Installation instructions
Download file to Desktop
The file XPS_9360_XXX.exe is using the Universal (Windows/DOS) format and
is designed to be directly executed from Windows environment.
1. Click Download now. The File Download window appears.
2. Click the Save button. The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button. A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress
Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The
update utility reboots your system in order to get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled 9360_BIOS_Rev_XXX.exe. the Dell
BIOS Flash window appears.
2. Click the Continue button. The message Pressing OK will close all applications, shut
down Windows, Flash the BIOS, then reboot appears.
3. Click the OK button. The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS diskette. This executable file does not
create the DOS system files.
1. Copy the file XPS_9360_XXX.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\ XPS_9360_XXX.exe (where Y is the drive letter
where the executable is located).
--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a
BitLocker enable system. If you doesn't enable BitLocker on your system you can
ignore it.