Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
File Name: Dell_Tablet_Dock_Update_Tool_41.27_M1YTP_A06_ZPE.exe
File size: 2.72 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 17739cef8d2322757a7f754787801fa9
SHA1: 496b132c8b88671ed104c142da4984a095f7974a
SHA-256: e8d66e8cbfa1481b4655d3ea927a9b129e24d51418b912750d250d6017003d17
Fixes & Enhancements
Fixes:
- This package fixes the issue where the speaker on the external monitor is not detected when switching between 5100 Pro and 71xx Pro series tablets
Enhancements:
- Not Applicable
Important Information
Note: This update cannot be run using the Dell Venue 5130 tablet. This can only be run using Dell Venue 71xx tablet, Latitude 13 7000 Series 2-in-1 notebook or Dell Latitude 517x tablet. Do not attempt to update the DTDK Tablet Dock firmware via remote download/execution.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
Installation instructions
Note: Do not attempt to update Tablet Dock firmware via remote download/execution.
Download
1. Click "Download File" to download the file.
2. When the File Download window appears, click "Save this program to disk" and click "OK". The "Save In" window appears.
3. From the "Save In" field, click the down arrow and then click to select Desktop and click "Save". The file downloads to your desktop.
4. When the "Download Complete" window appears, click "Close". The file icon appears on your desktop.
Preparation for update
- External monitor(s) must be on and connected to the Dell Tablet Dock I/Dock II (HDMI and/or DisplayPort).
- The Tablet display must be set in PC screen only mode.
- Dell Tablet Dock power adapter must remain connected to the dock and plugged into A/C power during the update process.
- The Tablet must remain docked in the Dell Tablet Dock I/Dock II during the update process.
- Do not Shut Down or put the Tablet in Sleep mode during the update process (Make sure System Sleep and Display Timeout are set to 10 minutes or greater).
Note: If the above conditions are not met during the firmware update process, the firmware update will fail or will not complete.
Installation
1. Double-click the new icon on the desktop labeled "Dell_Tablet_Dock_Update_Tool_M1YTP_A06_ZPE.exe". If the User Account Control windows appears, click "Yes" to continue.
2. Package details window comes up, click "Continue".
3. Click "Ok" to unzip folder, then click "Ok" when unzip is complete.
4. Browser window with set up instructions appears. Set up the Tablet, Dock I/Dock II and display according to the instructions. Click "Install Now" button.
5. Click "Update" on the firmware update tool to begin the update process.
- If the update too indicates a set up error, correct it and press "Retry".
A bar shows the update progress. The update takes approximately 2 minutes to complete.
6. When complete, the update tool displays "Update Process Successful!". Click the "Done" button to exit the update tool.
Unplug the power connector from the Dell Tablet Dock I /Dock II for 15 seconds, then plug the power connector back into the Dell Tablet Dock I /Dock II for the update to be complete.