Dell PowerVault NX400 Identity Module
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.For motherboard replacement of PowerVault NX400 only!
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: N/A
Enhancements: N/A
Read MoreEnhancements: N/A
Version
1.00, A00
Release date
25 Sep 2012
Download Type
Applications
Category
Lifecycle Controller – Legacy
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: An application
File Name: MR03C_NX400CustBSU_1_0.exe
File Size: 202.14 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Application
To ensure the integrity of your download, please verify the checksum value.
MD5:
12da7c5fd8132764143d141f073ed923
SHA1:
d2412677beb14991b967d1ad170dcf9b9cf5f5eb
SHA-256:
d2d39be815854c43361c73e0e3a5c5bb5bcd1c23985fb93f24d433ede4c27881
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Motherboard replacement is a service procedure and should only be performed by a certified Dell service technician.
Supported Operating Systems
Not Applicable
Applies to
ID MODULE
Installation instructions
********* install instructions for "Customer Board Service Utility Identity Module" *****
1) Ensure that the IdentityModule's exe file has 'BSU' in its file name.
Caution: The exe file name without 'BSU' ( Board Service Utility) will fail to update if upload is attempted after motherboard replacement.
error message: RAC0142: The firmware image file is not valid for iDRAC firmware update.
2) Extract out the .pm file from the zip pack exe in this release.
3) Login into iDRAC GUI.
4) Navigate to 'iDRAC firmware update' link located on left pane.
5) Upload the .pm file. Wait for iDRAC reboot to complete.
6) Reboot the system.
7) Verify the Branding changes ( on iDrac GUI and System) requested in this .pm file.
Reboot will be required
1) Ensure that the IdentityModule's exe file has 'BSU' in its file name.
Caution: The exe file name without 'BSU' ( Board Service Utility) will fail to update if upload is attempted after motherboard replacement.
error message: RAC0142: The firmware image file is not valid for iDRAC firmware update.
2) Extract out the .pm file from the zip pack exe in this release.
3) Login into iDRAC GUI.
4) Navigate to 'iDRAC firmware update' link located on left pane.
5) Upload the .pm file. Wait for iDRAC reboot to complete.
6) Reboot the system.
7) Verify the Branding changes ( on iDrac GUI and System) requested in this .pm file.
Reboot will be required
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.