Dell Alienware 14 System BIOS.

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : MYJR5

Importance : Recommended

Version : A03, A03 Latest version Recommended version Latest and Recommended version

Release Date : 23 Jul 2013

Download Type : System BIOS

Category : BIOS

Dell Alienware 14 System BIOS

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: AW14A03.exe

File size: 10.79 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 95ed6b997da09524418ccdc8c60e734d

SHA1: 5f24f9ab16016d52dd59bdaf75349e19a5702ccc

SHA-256: 40536ed4185ad33afa6a8a65b6f6876f77cb762caf0b18c9da960b7fb7a2025b

Download .EXE

Fixes & Enhancements

[BIOS]
1. Update Intel GOP 5.0.1032.
2. Update Intel VBIOS 2175.
3. Modify load default behavior in Setup Menu.
4. Enhance secure boot function.
5. Enhance Panel information interface.
6. Update Microcode 306C3h Rev.09h.
7. Add New ROM part support.
8. Disable WLAN ASPM L0s.
9. Modify SATA configuration behavior for tool load default.
10. Add CMFC OEM Project Function.
11. Enable Nvidia GC6 function

Installation instructions

[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system

Reboot will be required

Dell Alienware 14 System BIOS.

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to