Intel MEMPEK1J016GAD and MEMPEK1J032GAD PCIe NVMe Solid State Drive Firmware Update
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the firmware for Intel MEMPEK1J016GAD 16GB and MEMPEK1J032GAD 32 GB, Revision K4110440. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives that manages the functionality of the device.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Fixed the issue where the solid-state drive (SSD) stops responding.
- Fixed the issue where the drive displays an error of Inaccessible Boot Device due to different power state timings.
- Fixed the issue where no drive attached error message is displayed in low power mode.
- Fixed the issue where the SSD fails to increase the Unsafe Shutdown Count of the system, which causes an error.
Enhancements:
- Enhanced the capabilities of debugging report.
Read More- Fixed the issue where the solid-state drive (SSD) stops responding.
- Fixed the issue where the drive displays an error of Inaccessible Boot Device due to different power state timings.
- Fixed the issue where no drive attached error message is displayed in low power mode.
- Fixed the issue where the SSD fails to increase the Unsafe Shutdown Count of the system, which causes an error.
Enhancements:
- Enhanced the capabilities of debugging report.
Version
K4110440, A00
Release date
04 Feb 2020
Download Type
Firmware
Category
Storage
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: ZipPack External
File Name: Intel MEMPEK1J016GAD_MEMPEK1J032GAD N67TJ_ZPE.exe
File Size: 3.24 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
06697fe7c0869dd9efee9b0273aabb49
SHA1:
07b8cdd05bd3180484cf43bd8c2d4409e5f5735b
SHA-256:
db2a32ab9018e43cccef82c13c1ff2c7c1242ca7cf1d7e548a2e772f419cbec5
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
It is recommended that you back up the data in the system before performing this update. Do not interrupt your system during the firmware upgrade process. If the firmware upgrade process is interrupted, the solid-state drive may not function properly.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
Applies to
M.2 Intel Optane Memory 16GB
M.2 Intel Optane Memory 32GB
Installation instructions
Note:
Before updating this firmware, ensure that you back up the data in the system and close all open applications. It is also recommended to connect the power cable when it is not a desktop and disconnect all external storage devices.
Updating the firmware from Windows
Download
1. Click Download File to download the file.
2. When download is complete, run the downloaded file to extract to your drive.
3. The file explorer opens pointing to the directory containing the download package. Take note of the path.
Upgrade Procedure
1. Close all open applications, and save your work before the firmware update process.
2. Go to the location where you have downloaded the package.
3. Run irmfuu_7.1.11_win64 as administrator.
A command prompt interface is displayed. Wait for the update to take place.
4. After the command prompt window closes, reboot your system to complete the installation.
Before updating this firmware, ensure that you back up the data in the system and close all open applications. It is also recommended to connect the power cable when it is not a desktop and disconnect all external storage devices.
Updating the firmware from Windows
Download
1. Click Download File to download the file.
2. When download is complete, run the downloaded file to extract to your drive.
3. The file explorer opens pointing to the directory containing the download package. Take note of the path.
Upgrade Procedure
1. Close all open applications, and save your work before the firmware update process.
2. Go to the location where you have downloaded the package.
3. Run irmfuu_7.1.11_win64 as administrator.
A command prompt interface is displayed. Wait for the update to take place.
4. After the command prompt window closes, reboot your system to complete the installation.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.