LSI SAS 9207-8e

Restart required

Driver Id : NN9JX

Importance : Recommended

Version : V.20, A01 Latest version Recommended version Latest and Recommended version

Release Date : 27 Jan 2015

Download Type : Driver

Category : SAS Non-RAID

Sas2Flash utility used to update firmware and drivers for LSI 9207-8E cards in Windows and Linux environments.

Download Files

File Name: LSI Phase 20 Driver and Firmware.zip

File size: 497.15 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 1d4f00c5b156027093f64aaa95efae3d

SHA1: 7183f5d1a339538e8b4105f3a5035d69e2fd63f4

SHA-256: 9ab55ae568814a1967a799a69a74650432a5866da1054e6b4b9c65deb8e06027

Download .ZIP

Fixes & Enhancements

Fixes:
-Not Applicable

Enhancements:
- Supports End-to-End Data Protection (EEDP)
- Supports 1.5Gb, 3Gb, and 6Gb SAS expanders/devices and SATA devices
- Supports PCI-Express bus protocols
- Supports MSI/MSI-X
- Supports LSI MPT common software interface
- Supports multiple host adapters
- Supports multiple Logical Unit Numbers (LUNs)
- Supports Scatter-Gather
- Supports SCSI pass-through functionality
- Supports disk array configurations with no LUN 0
- Supports disk array configurations with non-contiguous LUNs
- Supports Storport Interrupt Redirection performance enhancements
- Auto request sense
- Maximum block size support: 1 Mbyte (32-bit), 2 Mbyte (64-bit)
- Supports Storport Extended SRB (Storage Request Block)

Installation instructions

1. For Windows Driver:
a. Open Device Manager
b. Navigate to the LSI card
c. Select Update Driver and navigate to the correct folder under Sas2_Phase18
d. Install the driver

2. Updating Windows Firmware:
a. Navigate to the Firmware folder
b. Using CMD line run sas2flash utility
c. Navigate \\LSI\9207_8e_Package_P18_IT_Firmware_BIOS_for_MSDOS_Windows\Firmware\HBA_9207_8e_IT
d. Run >sas2flash -fwall e9207-8e.bin

4. For Linux Driver Update:
a. See installation guide for instructions based on distribution of linux.

4.For Linux Firmware Update
a. Open Command Prompt (terminal or similar)
b. Navigate to the Sas2Flash linux folder
c. >sas2flash -fwall example.bin

Reboot will be required

LSI SAS 9207-8e

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions