Dell Server PowerEdge BIOS R740/R740xd/R640/R940/7920R Version 2.17.1

Rolling back to a previous BIOS from 2.14.2 will cause a TXT trusted boot failure with TXT enabled. Since the Intel ACM's SVN (Security Version Number) was increased in BIOS 2.14.2 to address the Security Vulnerabilities CVE-2021-0559, CVE-2021-33123, CVE-2021-33124. The purpose of incrementing the SVN is to prevent executing an older ACM with the vulnerabilities.
- The INTEL ACM's SVN was also increased in the BIOS 2.9.4 since the 1st BIOS revision of this platform as well.

When using an Update Package (DUP) file or the UEFI Shell command (an EFI file) to update the BIOS version, the process takes longer duration. To resolve this issue, do one of the following:
- Update the BIOS version using an Out-of-Band (OoB) tool such as iDRAC--use GUI or run the RACADM command. See the iDRAC User's Guide or RACADM CLI Reference Guide available on the support site.
- Reduce the system memory capacity by physically removing the memory modules and perform the BIOS update and retry the operation.

When one or more PCIe devices are installed on the system and if the cards require more of limited legacy I/O resources, the system might modify the I/O resources causing it to restart automatically. The UEFI0256 error message is logged, and the system does not allocate the PCIe resources required. To resolve this issue, do one of the following:
- Remove the PCIe cards from the system that are not used to free up the legacy I/O allocation and provide more I/O allocation space.
- From the System Setup menu, disable to PCIe cards that are not used to free up the legacy I/O allocation.

When one or more PCIe devices are installed on the system and if the cards require more of Memory-Mapped I/O (MMIO) resources, the system might modify the MMIO resources causing it to restart automatically. The UEFI0256 error message is logged, and the system does not allocate the required PCIe resources required. To resolve this issue, do one of the following:
- Remove the PCIe cards from the system that are not used to free up the MMIO allocation.
- From the System Setup menu, enable the Memory Mapped I/O above 4GB option to free up the MMIO allocation.

NOTE: Before working inside your system, follow the safety guidelines listed in the Safety Instructions topic in the Installation and Services Manual of your respective server model available on the support site.

Dell Update Package Instructions for DRMK
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
-------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.

You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign