Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Latitude_5289_1.17.1.exe
File size: 13.06 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: d6120a3bde39c5dff81503ba44ae34ec
SHA1: 5ff7d9e7891b9d9075c981fdd60dc7d2c3e93a19
SHA-256: 4f92b0191d7b5474a6bbcdf4c7415684602abe6b41fffa425c923a15ce6ed1d5
File Format: This file format contains plain text which can be viewed with a standard text editor.
File Name: Latitude_5289_1.17.1.txt
File size: 13.6 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: 95806e688e8008b874d4d579d3b1d384
SHA1: 029397df6b6b324f497c8ef16fcbed6ecfb5408a
SHA-256: 7250913ce1699d958e41c93dc97ddf4960e4986ebd70f3d20adf03cab0b6f6f7
Fixes & Enhancements
Fixes:
- Fixed the issue where the system cannot set hard drive password with Dell Client Configuration Toolkit.
- Fixed the issue where a non-US language keyboard does not work in the Dell Data Protection Encryption environment.
- Fixed the issue where the TPM setting may be unexpectedly enabled after loading the Custom User Settings in BIOS.
- Fixed the issue where the system does not pass POST when the security boot on dual UEFI mode on the Dell Command Configure tool is enabled.
- Fixed an issue with Secure Boot Option ROM Signature Verification.
- Firmware updates to address security advisories INTEL-SA-00191(CVE-2018-12201, CVE-2018- 12202, CVE-2018-12203).
- Firmware updates to address security advisory INTEL-SA-00185 (CVE-2018-12188 CVE-2018-12190 CVE-2018-12191 CVE-2018-12192 CVE-2018-12199 CVE-2018-12198 CVE-2018-12200 CVE-2018-12187 CVE-2018-12196 CVE-2018-12185).
Enhancements:
- Enhanced Wake on Lan to PXE (Preboot Execution Environment) feature on Dell WD15 and TB16 docking station.
- Updated the Realtek USB LAN firmware.
- Updated the Intel Video BIOS.
- Updated Intel Graphics Output Protocol driver.
- Updated the Thermal Algorithm for enhancing the performance of the system.
- Updated the Embedded Controller Engine firmware.
- Supports Dell Dock Station WD19.
Important Information
Important:
- Once BIOS is upgraded, you cannot downgrade BIOS EXE/ Recovery (RCV) to the versions before 1.1.5 due to restrictions.
- If the existing BIOS version is older than 1.15.1, update the BIOS version to 1.15.1 before installing the latest version.
Supported Operating Systems
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Precision_5530_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Precision_5530_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes and reboot the system.
Applies to
Dell Latitude 12 5000 Series 2-in-1/ Latitude 13 7000 Series 2-in-1