Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
File Name: LMT-256M3M-41-SZDC_ZPE.exe
File size: 2.42 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: cef7f86c66c5641414b45e13f6d83b6e
SHA1: cc961dbcfdd3ce799ed0a46bee71a56d90421ae9
SHA-256: 923f0effd3e5d02ffbac43aab8f0bc3d7335c2376ff33bf38e7f4adb8804bbd9
Fixes & Enhancements
Fixes
- Fixed compatibility issues with Dell Data Protection Access v2.3.
Enhancements
- Not Applicable.
Important Information
1. Please upgrade your system in the following order:
- Upgrade the Solid State Drive (SSD) firmware to this version (SZDC).
- Upgrade Dell Data Protection Access to version 2.3.
2. Your system may not boot if the above upgrade sequence is reversed.
3. Please follow the DOS firmware upgrade instructions to upgrade the SSD firmware to recover your system.
WARNING:
- As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update.
- This firmware update process is done entirely at your own risk.
- If performed correctly, there will be no loss of system or user data on the drive.
- However, if the firmware process is interrupted for any reason, your solid state drive may not function properly.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows Vista, 32-bit
Windows Vista, 64-bit
Installation instructions
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\NXRW9". (Where 'NXRW9' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\NXRW9" (where 'NXRW9'is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Reboot will be required