Download Files
File Name: OS_Web_v8.6_710_5060_ENG.zip
File size: 71.76 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: e2e94ccca2b326f194f701ff0b69b9bb
SHA1: aa8f12ab4653f41604c0effc1d54b7f89fdcf8c0
SHA-256: fe9cdb3132b3fcc4f44ee8cb8c50c94fd64f13eed1d51eee90c865fa0068a9f5
Fixes & Enhancements
Enhancements:
- Flip 180 degrees option that flips the display 180 degrees is added into the Rotation drop-down list in Display Setup. If either of the 90-degree screen rotation option is already applied, changing the option to Flip 180 degrees only rotates the screen to 90 degrees more.
- Added the EnableHomeWireless INI parameter that allows a user to access the Network Setup window from the desktop when the privilege is set to None.
- Added the INI parameters that allow you to disable the Citrix SSPR PIN icon and the Change my PIN radio button.
- Added the DelayReboot INI parameter to delay the reboot when configurations are applied from Wyse Management Suite.
- Updated the INI parameter names to allow_list and block_list from white_list and black_list.
- Updated the client discovery to method to disable DNSFileServerDiscover, WMSEnable, and DHCPOptionsRemap after receiving initial configuration from Wyse Management Suite, HTTPS, or FTP servers.
Fixes:
- Fixed issues from the previous ThinOS release. For more information about fixed issues, see the Dell Wyse ThinOS 8.6_710 Operating System Release Notes.
Important Information
Do not power off your thin client until the installation is complete.
Recommend to use 7zip for extraction
Supported Operating Systems
Installation instructions
Installing an image by using HTTPS server:
1. Download the latest ThinOS firmware and latest ThinOS packages that corresponds to your thin client model. If the firmware and packages are in the form of a compressed self-extracting (.EXE) or zipped file (.ZIP), then extract the files.
2. Place the extracted firmware files in the C:\inetpub\ftproot\WYSE\wnos folder, and the packages to C:\inetpub\ftproot\WYSE\wnos\pkg on your HTTPS server.
3. Create a wnos.ini text file (using a text editor) in the C:\inetpub\ftproot\WYSE\wnos folder with the following INI parameters:
Autoload=1 loadpkg=1 Addpkg=horizon
4. Save the wnos.ini file.
5. To locate the HTTPs File Servers/Path from Wyse 5060 thin client, do the following:
5.1. On the ThinOS client desktop, navigate to System Setup > Central Configuration > General.
5.2. In the General tab, enter the IP address of the HTTPS server or directory, username and password.
5.3. Click OK.
6. Restart the thin client and wait until the auto-installation of packages is complete.
Installing an image by using Wyse Management Suite:
1. Download the ThinOS firmware file to a desired location or the Wyse Management Suite server.
2. Log in to Wyse Management Suite and navigate to the Apps and Data page.
3. Click OS Image Repository and select ThinOS.
4. Click Add Firmware File and browse the Firmware file. Provide an appropriate description and click Upload.
5. To update Group of devices, do the following:
5.1 Click Groups & Configs and select the group where the device is present.
5.2 Click Edit Policy-->ThinOS-->Advanced Configurations.
5.3 Click Firmware Upgrade and select Configure this item.
5.4 Select the Device Model and Firmware File.
5.5 Click Save & Publish.
6. To update a single device, do the following:
6.1 Go to the Devices page and click your preferred device.
6.2 On the Device Details page, click Create/ Edit Exceptions.
6.3 Click Advanced Configurations.
6.4 Click Firmware Upgrade and select Configure this item.
6.5 Select the Device Model and Firmware File.
6.6 Click Save & Publish.
Installing an image by using Wyse Device Manager (WDM):
1. To add device to the WDM server, on the ThinOS thin client, navigate to Desktop->Shutdown.
2. Select the Reset the system setting to factory defaults check box.
3. Select the Restart the system radio button, and click OK.
4. Log in to the WDM server after the ThinOS device is restarted.
5. Click Devices, and verify if the device is discovered and displayed on the Devices page in WDM.
6. Download the ThinOS file (Ex: ZD10_wnos) to C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
7. To configure the FTP server path for image upload, create the WNOS.ini file in C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
8. Create the INI parameters with the following values:
SignOn=0 and autoload=1.
9. To allow WDM to use FTP when updating devices, log in to the WDM server with valid admin credentials.
10. Navigate to System-->WyseThinOS.
11. Enable the WTOS INI Path upon check-in settings.
12. Click the Save button to save the settings.
13. To allow the client to check in to the WDM server, on the ThinOS client, navigate to Desktop-> System Setup-> Central Configuration.
14. Click the WDA tab and then click the Protocol priority as WDM radio button.
15. Select all the Discovery Settings check boxes, such as DNS_NameRecord, DNS_SRVRecord and DHCP_Inform.
16. To set the FTP server path in ThinOS clients, click the General tab.
17. Enter a valid file servers/Path as configured (Ex:10.XXX.XXX.XXX/Rapport/WTOSCONFIG).
18. Click OK.
19. To initiate WTOS image update, navigate to Desktop -> Shutdown.
20. Click the Restart the system radio button and then click OK.