LITE-ON IT Solid State Drive Firmware Update
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the LITE-ON IT Solid-State Drive firmware update. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives. The firmware manages the functionality of the devices.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- Improved the compatibility with Self-Monitoring, Analysis, and Reporting Technology System (SMART) tool.
Read MoreVersion
HM9110B, A01
Release date
02 May 2014
Download Type
Firmware
Category
Storage
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: ZipPack External
File Name: LMT-512L9M-HM9110B_ZPE.exe
File Size: 1.53 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
d29edc318f89536454ac8a0d13f98c1b
SHA1:
fab4c62e8716ab9bf3d124dd1ea8908fc312c1f2
SHA-256:
1ce4a7fa0218b9b8996bff3f8088557394671144db678cd6d9b2314f9d02501d
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
It is recommended that you back up your data before performing this update. Do not interrupt your system during the firmware upgrade process. If the firmware upgrade process is interrupted, the solid-state drive may not function properly.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Applies to
LITEON L9M mSATA 512G SSD
Installation instructions
Firmware upgrade through the Windows utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Run the utility to start the firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then click Update.
The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding.
3. Click OK to proceed.
Firmware upgrade proceeds. When the firmware upgrade process completes, you are prompted to reboot the system.
4. Close all open applications, and save your work before rebooting the system.
The system reboots and loads the firmware. Once the firmware update is complete, a message saying the firmware update done is displayed.
5. Sign in to the operating system.
6. To confirm that the firmware update was successful, open Device manager > open SSD> click Properties> choose hardware ID under Details and check the firmware version.
Firmware upgrade through the DOS utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Go to the DOS subdirectory.
2. Insert a blank CD into the optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive of the system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. Click Y to proceed.
8. After the upgrade is completed, you are prompted to reboot the machine. Remove the CD and reboot your system.
9. Open Device manager > open SSD > click Properties > choose hardware ID under Details and check the firmware version to confirm that the firmware update was successful.
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Run the utility to start the firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then click Update.
The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding.
3. Click OK to proceed.
Firmware upgrade proceeds. When the firmware upgrade process completes, you are prompted to reboot the system.
4. Close all open applications, and save your work before rebooting the system.
The system reboots and loads the firmware. Once the firmware update is complete, a message saying the firmware update done is displayed.
5. Sign in to the operating system.
6. To confirm that the firmware update was successful, open Device manager > open SSD> click Properties> choose hardware ID under Details and check the firmware version.
Firmware upgrade through the DOS utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Go to the DOS subdirectory.
2. Insert a blank CD into the optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive of the system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. Click Y to proceed.
8. After the upgrade is completed, you are prompted to reboot the machine. Remove the CD and reboot your system.
9. Open Device manager > open SSD > click Properties > choose hardware ID under Details and check the firmware version to confirm that the firmware update was successful.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.