Seagate SAS ST9146803SS and ST9300603SS firmware version FS62

hi testing

Driver Id : PGHWW

Importance : Recommended

Version : FS62, A02 Latest version Recommended version Latest and Recommended version

Release Date : 06 Dec 2011

Download Type : Firmware

Category : SAS Drive

This release contains firmware version FS62 for Seagate SAS (10K rpm 2.5" SAS) 146GB and 300GB Hard Drives. Vendor model numbers ST9146803SS and ST9300603SS.

Download Files

File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.

File Name: FRMW_WIN_R245084.EXE

File size: 4.91 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 03B88B6C7C07E16631635BDBEB4D3EE0

Download .EXE

File Format: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.

File Name: FRMW_LX_R245084.BIN.sign

File size: 194 Bytes

To ensure the integrity of your download, please verify the checksum value.

MD5: DA3785963E92C8BDF0C89B30F413E7B5

Download .SIGN

File Format: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.<br /><b>Note:</b> Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.

File Name: FRMW_LX_R245084.BIN

File size: 3.41 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 86B0B6534F65BB10C9DF1077ED6DEACD

Download .BIN

Important Information

Important Information - External:
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.

There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.

Installation instructions

Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Seagate SAS ST9146803SS and ST9300603SS firmware version FS62

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to