NEC ND-3650A HH SATA 16X DVD+/-RW, v.108C, A03

Custom Instructions for ND3650A_fw108C.zip: 1. Download the ND3650A_fw108c.ZIP file to a specific location (instructions are also included in the ZIP file) 2a. If running windows XP, please proceed to step 13. 2b. If running VISTA, right click on the ""AutorunUtility"" file and select ""Run as Run As Administrator"" 3. Please wait while A USER ACCOUNT CONTROL dialogue box will pop up warning you that an Unidentified program wants access to your computer. 4. Please select ""ALLOW"" 5. An AUTORUN UTILITY dialogue box will pop up. The default setting should be ON. 6. Please change to ""OFF""by clicking on empty circle immediately to the left of the word ""OFF"". 7. PLease select ""CHANGE"" 8. Another AUTORUN UTILITY dialogue box will pop up to confirm that Autorun setting will be changed. 9. Please select OK. 10. Another AUTORUN UTILITY dialogue box will pop informing you that you will need to Restart your computer. 11. Please select OK. 12. Your computer will now automatically RESTART13. From the location used in step#1, Right click on the ""ND3650A_v108C_AutoRunChk"" file and select ""Run as Run As Administrator"". 14. Please wait while A USER ACCOUNT CONTROL dialogue box will pop up warning you that an Unidentified program wants access to your computer. 15. Please select ""ALLOW"" 16. An OPTIARC DRIVE FIRMWARE FLASH UTILITY dialogue box will pop up confirming Update Version 108C to be applied 17. Please select FLASH to begin the firmware upgrade operation. 18. PLease wait for Flash to complete and DO NOT TURN OFF POWER during FLASH operation. 19. When the FLASH operation is complete, an OPTIARC DRIVE FIRMWARE FLASH UTILITY dialogue box will pop up when the FLASH operation is complete 20. The pop up dialogue will state ""Update Successful. Please check setting of Autorun."" 21. Please select OK. 22. Select CANCEL to close the OPTIARC DRIVE FIRMWARE FLASH UTILITY dialogue box 23. From the location used in step#1, right click on the ""AutorunUtility"" file and select ""Run as Run As Administrator"" 24. Please wait while A USER ACCOUNT CONTROL dialogue box will pop up warning you that an Unidentified program wants access to your computer. 25. Please select ""ALLOW"" 26. An AUTORUN UTILITY dialogue box will pop up. The setting should currently be set to OFF. 27. Please change to ""ON""by clicking on empty circle immediately to the left of the word ""ON"" 28. Please select ""CHANGE"" 29. Another AUTORUN UTILITY dialogue box will pop up to confirm that Autorun setting will be changed. 30. Please select OK. 31. Another AUTORUN UTILITY dialogue box will pop informing you that you will need to Restart your computer. 32. Please select OK. 33. Your computer will now automatically RESTART with Firmware upgraded