Seagate ST9160418ASG 160GB/ST9250464ASG 250GB 2.5 7200 S2 HDD Firmware Update

Custom Instructions for R250673.EXE: PLEASE PRINT THE FOLLOWING INSTRUCTIONS/For Bootable CD option (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250673.EXE) file and select "RUN" then "RUN" again. 2. Press "Continue" then "OK" to extract the files to the provided location. 3. If you have CD imaging software that supports the .ISO image format the file "C:\DELL\Drivers\R250673\Seagate Utility.ISO" is an image for a bootable CD that will automatically run the application. 4. Boot to the CD. 5. The Seagate utility will start automatically. 6. The utility will autoscan and update the appropiate Seagate ST9160418ASG & ST9250464ASG. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the CD and power off your PC. 9. Power on your PC to continue normal operation. For Other Bootable option (IE. USB key, etc.) (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATINGYOUR HARD DRIVE) - Click on the (R250673.EXE) file and select "RUN" then "RUN" again. - Press "Continue" then "OK" to extract the files to the provided location. - The files are located in "C:\DELL\Drivers\R250673\Files" directory. - Add the files to your bootable media and run the "FLASH.bat". - The Seagate utility will start automatically. - The utility will autoscan and update the appropiate Seagate ST9160418ASG & ST9250464ASG. - Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. - Remove the Bootable Media and power off your system.