USI FX100 Remote Access Portal, v.3.1.2, A10

Driver Id : R276888

Importance : Recommended

Version : 3.1.2, A10 Latest version Recommended version Latest and Recommended version

Release Date : 30 Jul 2010

Download Type : Firmware

Category : Video

.ALL file for host card, it is the same as .all file for Portal

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: R276888.exe

File size: 3.73 MB

Download .EXE

Installation instructions

Custom Instructions for R276888.exe:

Quick instructions for upgrading your firmware:

1. First log into the Portal Administration Web Interface

2. Select the "Upload" then "Firmware" tab.

3. Select the webpage Browse button to browse to the firmware '.all' file.

4. Select the File Upload window Open button

5. Select the webpage Upload button

6. Select the webpage OK button on the "Are you sure? This will upload a new firmware image." You will see a "This operation may take a few minutes" warning window.

7. Wait for the firmware upload to complete. The following message appears when complete: "Success Flash successfully programmed! You must reset the device for the changes to take effect."

8. Reset the Portal

9. Repeat these instructions for the Host Card

Note: Both the Portal and Host MUST have the same version of firmware, FW1.x will not work with FW3.0. Portals and host cards with firmware V1.2, must be updated to firmware V1.7, before updating to firmware V3.1

USI FX100 Remote Access Portal, v.3.1.2, A10

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to