Dell PowerConnect 6224, PowerConnect 6248, PowerConnect 6224F, PowerConnect 6224P, PowerConnect 6248P, v.3.2.1.3, A23

For more details please read the PowerConnect 6200 release notes included in this release.

This version has included the below new feature
1) Equalogic array port Auto Detection and Configure Ports for iSCSI Traffic

This version resolved the below field reported issues
1. Link Status should be displayed as D-Disable instead of Down, when a BPDU Guard enabled port receives BPDU with a higher priority.
2. Spanning-Tree BPDUs are being flooded even though status screen show BPDU flood disabled.
3. Switch occasionally hangs on reload.
4. Hostname is not updated in Running-Config when the name contains periods '.’
5. Probe port is not dropping the traffic when a port mirror session is enabled.
6. Fatal error crash and reload when uplinked to Cisco 6509 with ISDP enabled.
7. Displaying the wrong LACP system MAC address in "show lacp port-channel".
8. Console Lockup while configuring ACL for Dynamic ARP Inspection (DAI).
9. Combo ports 1/g45 - 1/g48 do not pass traffic when no negotiation is set
10. HTTPS fails if HTTP is disabled.
11. The status of VLAN 1 routing interface becomes DOWN
12. When using TACACs to authenticate user access to switch management AND a Management ACL is applied, no user login attempt is performed.
13. IPv6 Router sollicitation packet causes a crash.
14. Switch crashed when the port for the default route is disconnected.
15. Ports 25 & 26 not operational on PowerConnect6248 switch.
16. Ports 1 & 2 not operationalon PowerConnect6224 switch