Dell PowerVault 128T Tape Library, v. 131D-135D, A00

PowerVault 128T Library and Tape Drive Firmware

This release contains the following firmware versions for the PowerVault
128T Tape Library:
· PowerVault 128T LTO Library Firmware 1.31.D
· PowerVault 128T LTO Tape Drive Firmware E15V 4.183
· PowerVault 128T SDLT Library Firmware 1.35.D
· PowerVault 128T SDLT Tape Drive Firmware V37

Downloading the upgrade


1. Download and run the file 128TA00.EXE.

NOTE: You must download this file to the system connected to the
PowerVault 128T.

2. Run the executable file by double-clicking the icon.

3. Select Continue to extract the files.

4. The files will extract to the folder x:\dell\drivers\128T\Firmware-
A00, where x:\ is used to denote the system root path.

5. If the above folder does not exist, select OK to create it.

6. Locate the file readme.txt in the above-mentioned folder. This file
contains the install instructions listed below.

Directory of file contents:

x:\dell\drivers\128T\Firmware-A00 - Contains the update procedures.
x:\dell\drivers\128T\Firmware-A00\LTO Library – Contains the LTO library
firmware.
x:\dell\drivers\128T\Firmware-A00\SDLT Library – Contains the SDLT
library firmware.
x:\dell\drivers\128T\Firmware-A00\LTO Drive – Contains the LTO tape drive
firmware.
x:\dell\drivers\128T\Firmware-A00\Tape Tools – Contains Dell Library and
Tape Tools software that can be used for updating firmware.
x:\dell\drivers\128T\Firmware-A00\SDLT – Contains SDLT Tape Drive
Firmware and upgrade program

Upgrading the PowerVault 128T LTO Library Firmware

There are two options for upgrading the PowerVault 128T Library
firmware. These are through the Dell Library and Tape Tools software as
well as through the PowerVault 128T remote management card.

Upgrading the PowerVault 128T Library Firmware through Dell Library and
Tape Tools

1. Go to the directory x:\Dell\Drivers\128T\Firmware-A00\Tape
Tools. Click on the program Dell – LTT_Install.exe and follow the
directions to complete the installation. This program will create the
default directory x:\Program Files\Dell Library & Tape Tools. Do NOT
execute the utility at this time.

2. This will also install a copy of the Dell Library & Tape Tools
icon on your system desktop.

3. A reboot of the machine may be necessary to update the system
ASPI files.


Upgrading the firmware

1. Click on the Dell Library & Tape Tools icon on your system
desktop or click on HP_LTT.exe in the directory x:\Program Files\Dell
Library & Tape Tools.

2. The Dell Library & Tape Tools – Version 2.7 window will appear.

3. Click on Continue.

4. After the device scan is complete, select HP C7200 under the By
Product tab

5. Click on the Firmware icon above. A warning message may appear
that states:

There are no matching firmware files in the currently selected firmware
folder.

This is normal since the firmware upgrade directory has not been
specified. This will be performed in the next few steps.

6. Instructions for upgrading will appear on the left screen.

7. In the local firmware files tab of the Dell Library and Tape
Tools application, select the firmware location by Browsing to the
directory x:\Dell\Drivers\128T\Firmware-A00\LTO Library

8. Click on the update firmware tab and check the box next to the
Library (C7200)

9. Click on Start Update button.

10. A warning message will appear. After reading the message, click
OK.

11. The library will begin to upgrade the firmware. This may take up
to 30 minutes. The front panel of the PV128T will display the upgrade
status. Do not remove power to the library during this time.

12. At the end of the upgrade, a window will appear with the results
of the upgrade.

13. Once the upgrade is complete, click OK. The library will reboot
itself once the upgrade is complete.

14. Once the library has been upgraded, close the application.