LiteOn LTR24102M HH 24X CDRW, v. 4DS3, A02

* Follow these steps to install
You will need a blank formatted 1.44MB floppy disk to proceed with the
flashing process.

Steps to flash drive:

1. Download the R38713.exe file to a known directory.

2. Once the download is complete, navigate to the file and double click on
it to run the executable.

3. Follow the instruction prompts provided.

4. Double click on my computer to access folders inside.

5. Double click on floppy (a:) drive to to access 4DS3 file.

6. Copy and paste 4DS3 file to desktop.

7. From desktop, double click on 4DS3 icon.

8. Read the information that appears on screen and click yes.

9. After clicking yes, you will see Lite On LTR-24102M plus the firmware
revision level (e.g. 4DS2).

10. Click on flash at the lower right corner.

11. Click yes.

12. Restart system when when flash is completed. Some OSes will restart
automaticly.

13. To verify that drive has been flashed successfully, double click on
4DS3 icon. The screen should read LTR-24102M 4DS3