Dell ESM Firmware, A13

1. Download the .exe file to a directory on your hard drive. The file
downloaded is a self-extracting executable.
2. Execute the downloaded file and follow the on-screen instructions.
The files may be un-zipped to floppy disk or hard drive(if the hard drive
is in the system to be updated).
3. After the files have been un-zipped, you may delete the self-extracting
file downloaded in step 1.

MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "SMFLSH". This will run SMFLSH.BAT
4. Answer “Y” at the prompt to begin the upgrade.

Windows NT/2000 Version
Note: You must have the Dell Management software or OpenManage Server
Administrator installed to proceed.
There are two methods of upgrade in Windows NT/2000.
1. In a DOS window, change to the directory the files were un-zipped
to and type “SMFLSHNT”. Answer “Y” at the prompt to begin the upgrade.
2. Using Windows Explorer, browse to the location containing the
files un-zipped above(diskette or hard drive). Run(double-click)
SMFLSHNT.BAT and answer “Y” at the prompt to begin the upgrade.


WARNING:
1. DO NOT REMOVE THE DISKETTE DURING THE UPGRADE
2. UNDER WINDOWS NT/2000 DO NOT HIT ANY KEY ON THE KEYBOARD DURING THE
UPGRADE