LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, v.6.02a, A13

Default Instructions for Perc3_NW602a13.exe:

Installation Instructions
=========================
1. Download the file to a directory on your hard drive. The file
downloaded is self-extracting.
2. Execute the file and verify the unzip to location is A:\. If not,
change the location to A:\ and press unzip.
3. After the files have been unzipped to the diskette, press Close to exit
the WinZip self-extractor."

There are two methods for installing the Novell NetWare drivers and
applications:

Fresh Installation of the Netware Driver:

Follow the instructions in the Novell NetWare Installation Guide to
install NetWare on the server.
1. Boot to the Novell Netware OS CD
2. Follow the instructions on the screen until you reach the
Storage Driver Support screen. This screen is used to add, change or
delete drivers.
3. Select Storage Adapters on the Storage Driver Support screen.
4. Delete any existing PERC adapters.
5. Press "Insert" to add unlisted drivers. Press "Insert" again. A
path displays.
6. Insert the driver diskette created above into the floppy drive
and press "Enter".
7. The system finds the PEDGE3.HAM driver.
8. Return to the Driver Summary screen. Continue the installation.

Adding the Netware Driver to an Existing Installation
======================================================
Follow the instructions to add the driver to an existing installation.
1. At the root prompt, type "NWCONFIG" and press "Enter".
2. The Installation Options screen displays. Select Drive Options
and press "Enter". A window displays.
3. Select Configure Disk, and Storage Device Options. Press "Enter".
4. Select one of the following options display in the window:
Discover and load an additional driver.
Select an additional driver.
5. If you select the option to discover and load an additional
driver, the system discovers the extra unit. You are prompted to select a
driver from the list. Press "Insert" to insert the driver. This completes
the procedure.
6. If you choose the option to select an additional driver, the
Select a Driver screen displays. Press "Insert". Read the instructions
that are displayed.
7. Insert the driver diskette created above into the floppy drive
and press "Enter".
8. The system will find a driver and install it.