Dell ESM Firmware, A20

Default Instructions for R51439-PE6600-ESMA20.exe:

Dell Online Instructions:

1. Download the .exe file to a directory on your hard drive. The file
downloaded is a self-extracting executable.
2. Execute the downloaded file and follow the on-screen instructions.
The files may be un-zipped to floppy disk or hard drive(if the hard drive
is in the system to be updated).
3. After the files have been un-zipped, you may delete the self-
extracting file downloaded in step 1.

MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "SMFLSH2". This will run SMFLSH2.EXE
4. Answer “Y” at the prompt to begin the upgrade.

Windows NT/2000 Version

There are two methods of upgrade in Windows NT/2000.

1. In a DOS window, change to the directory the files were un-zipped to
and type “SMFLSH2NT”. Answer “Y” at the prompt to begin the upgrade.

2. Using Windows Explorer, browse to the location containing the files un-
zipped above(diskette or hard drive). Run(double-click) SMFLSH2NT.EXE and
answer “Y” at the prompt to begin the upgrade.


---------------------------------------------------------------------------

OpenManage Format

Note: You must have the Dell Management software or OpenManage Server
Administrator installed to proceed.

1. Download the .zip file.
2. Start Server Administrator.
3. Click System.
4. Click Main System Chassis.
5. Click Firmware.
6. Click the Update tab.
7. Click Browse and navigate to where the zip file was downloaded
8. Select the zip file, click Validate Update File
9. After the file is validated, click Begin Update and follow the
remaining prompts to perform the update.