Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
File Name: BR61212.exe
File size: 577.2 KB
File Format: This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
File Name: D2400A00.exe
File size: 491.14 KB
Fixes & Enhancements
First Initial Release for Dimension 2400
Supported Operating Systems
Installation instructions
Custom Instructions for D2400A00.exe:
Download:
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the file Download window appears, click "Save" to save the file to your hard drive.
Flashing the BIOS:
1. Browse the location where you have downloaded the file and double click the new file to run the BIOS flash program.
2. The BIOS flash utility window appears, click continue.
3. When the BIOS flash utility has completed you will be prompt to restart you computer. Click Yes.
4. BIOS flash Compete.
Custom Instructions for BR61212.exe:
Download:
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the file Download window appears, click "Save" to save the file to your hard drive.
Disk Creation:
1. Browse the location where you downloaded the file and double click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Installation:
1. Insert the first (or the only) disk of the set into the floppy drive.
2. Click Start, click Shutdown, click Restart, and the click OK.
3. Follow the on-screen instructions.