LSI Logic Ultra 320 SCSI Adapter Non-RAID, v.3.01.01, A06
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.LSI Logic PCI SCSI/FC MPI Driver for Netware 6.0 v3.01.01
This driver is for the LSI Logic 1020/1030 embedded SCSI controllers
This driver is for the LSI Logic 1020/1030 embedded SCSI controllers
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Release Highlights - Features:
==============================
None
Release Highlights - Fixes:
===========================
Removes QAS with Ultra320 drives mixed with Ultra160 drives to ensure Ultra160 drives get a fair negotiation to the SCSI bus.
Avoids possible hang condition when booting with a combination of U320 and U160 drives that could occur with the combination of the 1.03.04 SCSI firmware. The 1.03.04 SCSI firmware is part of the Poweredge 1600SC system BIOS vA08. The hang condition possibility is fixed in the firmware that is included in PE1600 CS system BIOS vA09 (and later). It is highly recommended to upgrade to the latest supported system BIOS (vA09 or later).
Read More==============================
None
Release Highlights - Fixes:
===========================
Removes QAS with Ultra320 drives mixed with Ultra160 drives to ensure Ultra160 drives get a fair negotiation to the SCSI bus.
Avoids possible hang condition when booting with a combination of U320 and U160 drives that could occur with the combination of the 1.03.04 SCSI firmware. The 1.03.04 SCSI firmware is part of the Poweredge 1600SC system BIOS vA08. The hang condition possibility is fixed in the firmware that is included in PE1600 CS system BIOS vA09 (and later). It is highly recommended to upgrade to the latest supported system BIOS (vA09 or later).
Version
3.01.01, A06
Release date
24 Nov 2003
Download Type
Driver
Category
SCSI non-RAID
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
File Format: One or more self extracting disk images inside of a self extracting zip
File Name: avlnwa06.exe
File Size: 1.15 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Novell Netware
Applies to
Ultra 320 SCSI Adapter Non-RAID
Installation instructions
Custom Instructions for avlnwa06.exe:
Note: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
*Download - Download the file to a known directory on your hard drive. The file downloaded is a release.
1) Click the "Download Now" link to download the file.
2) If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3) When the File Download window appears, click "Save" to save the file to a known location on your hard drive.
*Diskette Creation - Executing the release will create a Netware 5.1 and 6.0 driver diskette for the LSI Logic Ultra 320 SCSI controller. You will need a formatted 3 - 1/2 inch 1.44 MB floppy diskette for the following procedure.
1) Browse to the directory where you downloaded the file.
2) Double-click on the file to create the diskette set.
2) Insert a blank diskette then click Continue.
3) After all the files have been copied to the diskette, click Finish.
*Performing a new installation of Netware
1) Boot to the Novell Netware Installation CD.
2) For Netware 6.0: Follow the instructions on the screen until you get to the type of installation selection.
For Netware 5.1: Skip to step 4.
3) Select Custom Install.
4) Follow the instructions on the screen until you reach the "Storage Driver Support" screen. This screen is used to add, change or delete drivers.
5) Select "Storage Adapters" on the "Storage Driver Support" screen.
6) Press "Insert" to add unlisted drivers. Press "Insert" again. A path displays.
7) Insert the driver diskette created above into the floppy drive and press "Enter".
8) The system finds the LSIMPTNW.HAM driver for the LSI Logic Ultra320 SCSI adapters.
9) Return to the Driver Summary screen. Continue the installation.
NOTE:
After installing Netware 6.0 on a multiprocessor system, it will hang on bootup. This is due to the absence of the latest Support Pack files. To bring the system up, boot from the driver disk. This will display istructions to copy the essential file. Once the server is up and running, it is recommended to load the latest support pack to ensure a stable configuration.
*Adding the LSI Logic SCSI Driver to an Existing Netware Server
NOTE:
The LSI Logic SCSI Driver requires the latest support pack to be installed on a Netware 6.0 system. If the support pack files are missing, the server will hang on bootup.
1) At the server console prompt, type "NWCONFIG" and press "Enter". The "Configuration Options" screen is displayed.
2) Select "Driver Options" and press "Enter".
3) Select "Configure Disk and Storage Device Options" and press "Enter".
4) Select "Select an additional driver".
5) The "Select a Driver" screen displays. Press "Insert".
6) Press "F3" to select a new path.
7) Type "A:". Insert the driver diskette created above into the floppy drive and press "Enter".
8) The system will display the LSIMPTNW.HAM driver found on the diskette.
9) Select the driver and press "Enter".
*Special Installation Instructions for Array Manager 3.2-3.4
Follow these instructions to ensure that the controller appears in Array Manager Versions 3.2, 3.3, or 3.4 when using this driver.
1. Stop the Array Manager Service by typing "vxstop -F" and pressing "Enter" at the command prompt on the "System Console" screen.
2. Unload the old "LSICFGNW.NLM" by typing "unload LSICFGNW.NLM" at the command prompt on the "System Console" screen.
3. Copy the LSICFGNW.NLM file into the NWSERVER directory. This can be done several ways. The following method is given in steps A-E for convenience.
A. Go to the "X Server -- Graphical Console" screen. If it is not running, it may be loaded by typing "startx".
B. Open the "File Browser" Utility.
C. Ensure the driver disk is in the floppy drive and select and double-click on "A:\" to select it.
D. Right Click on "LSICFGNW.NLM" and select "copy" f
Note: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
*Download - Download the file to a known directory on your hard drive. The file downloaded is a release.
1) Click the "Download Now" link to download the file.
2) If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3) When the File Download window appears, click "Save" to save the file to a known location on your hard drive.
*Diskette Creation - Executing the release will create a Netware 5.1 and 6.0 driver diskette for the LSI Logic Ultra 320 SCSI controller. You will need a formatted 3 - 1/2 inch 1.44 MB floppy diskette for the following procedure.
1) Browse to the directory where you downloaded the file.
2) Double-click on the file to create the diskette set.
2) Insert a blank diskette then click Continue.
3) After all the files have been copied to the diskette, click Finish.
*Performing a new installation of Netware
1) Boot to the Novell Netware Installation CD.
2) For Netware 6.0: Follow the instructions on the screen until you get to the type of installation selection.
For Netware 5.1: Skip to step 4.
3) Select Custom Install.
4) Follow the instructions on the screen until you reach the "Storage Driver Support" screen. This screen is used to add, change or delete drivers.
5) Select "Storage Adapters" on the "Storage Driver Support" screen.
6) Press "Insert" to add unlisted drivers. Press "Insert" again. A path displays.
7) Insert the driver diskette created above into the floppy drive and press "Enter".
8) The system finds the LSIMPTNW.HAM driver for the LSI Logic Ultra320 SCSI adapters.
9) Return to the Driver Summary screen. Continue the installation.
NOTE:
After installing Netware 6.0 on a multiprocessor system, it will hang on bootup. This is due to the absence of the latest Support Pack files. To bring the system up, boot from the driver disk. This will display istructions to copy the essential file. Once the server is up and running, it is recommended to load the latest support pack to ensure a stable configuration.
*Adding the LSI Logic SCSI Driver to an Existing Netware Server
NOTE:
The LSI Logic SCSI Driver requires the latest support pack to be installed on a Netware 6.0 system. If the support pack files are missing, the server will hang on bootup.
1) At the server console prompt, type "NWCONFIG" and press "Enter". The "Configuration Options" screen is displayed.
2) Select "Driver Options" and press "Enter".
3) Select "Configure Disk and Storage Device Options" and press "Enter".
4) Select "Select an additional driver".
5) The "Select a Driver" screen displays. Press "Insert".
6) Press "F3" to select a new path.
7) Type "A:". Insert the driver diskette created above into the floppy drive and press "Enter".
8) The system will display the LSIMPTNW.HAM driver found on the diskette.
9) Select the driver and press "Enter".
*Special Installation Instructions for Array Manager 3.2-3.4
Follow these instructions to ensure that the controller appears in Array Manager Versions 3.2, 3.3, or 3.4 when using this driver.
1. Stop the Array Manager Service by typing "vxstop -F" and pressing "Enter" at the command prompt on the "System Console" screen.
2. Unload the old "LSICFGNW.NLM" by typing "unload LSICFGNW.NLM" at the command prompt on the "System Console" screen.
3. Copy the LSICFGNW.NLM file into the NWSERVER directory. This can be done several ways. The following method is given in steps A-E for convenience.
A. Go to the "X Server -- Graphical Console" screen. If it is not running, it may be loaded by typing "startx".
B. Open the "File Browser" Utility.
C. Ensure the driver disk is in the floppy drive and select and double-click on "A:\" to select it.
D. Right Click on "LSICFGNW.NLM" and select "copy" f
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.