Download Files
File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
File Name: Power_Firmware_RPKM0_WN32_05.07.0D_A00.EXE
File size: 4.36 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 25b740f6ca3812596fb75cf7ce9ff435
SHA1: 508b7ccbd478f608c7f893f6d6396a70ad0555b9
SHA-256: 9ffbc9a06d4d605b2cdbea115fa98d1acb3e2445556b0c7dadf5d0b99cc7d2da
File Format: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
File Name: Power_Firmware_RPKM0_LN32_05.07.0D_A00.BIN.sign
File size: 194 Bytes
To ensure the integrity of your download, please verify the checksum value.
MD5: e773d771236d604487e116730240f31c
SHA1: c045b2d3b3097d76deeb2d6e396117da98252222
SHA-256: e56b7dc9a9616d91415e6f21879de1b19e4dc6dc54f6e36380f3e1e4978c4a11
File Format: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
File Name: Power_Firmware_RPKM0_LN32_05.07.0D_A00.BIN
File size: 2.17 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 1573619febdce2c75fdfecf8a03769a8
SHA1: 7a9039084e8bf64cdd24f86e008c7a50c2ecfc74
SHA-256: 1a127ca350e9996dd3a67690ce2445d667fbe1d98da6355364ceb6864e9030f6
Supported Operating Systems
Installation instructions
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter an irrecoverable state and will cause managed system not to boot.
IMPORTANT:
After a successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to disturb/restart manually the system, wait until the PSU FW update finishes. (Update time may vary depending on number of PSU for update, it may vary approximately from 10 mins to 20 mins.Margin should be added to ensure the Dell Update Package (DUP) is not interrupted. Once the firmware update is complete, the managed system will reboot automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to importonce on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.a
Reboot will be required
Applies to
12G 550W
LiteOn 550W PSU (PN: M95X4)