LSI 9265-8i & LSI 9285-8e SAS RAID card FW

1.FW crashes during foreign configuration import.
2.Evaluation Order Violation
3.Operands don't affect result
4.Development tool fixes
5.Enclosure was not detected.
6.OVERRUN STATIC: CIDs 10281, 10283 Out-of-bounds access
7.Development tool fixes
8.Drives need to be marked foreign when its state changes to unconfigured good and it has a valid DDF.
9.Development tool fixes
10.Development tool fixes
11.UNUSED VALUE : CIDs 10376, 10377, 10398, 10399
12.Continues PR 2nd time on Raid 1 and then delete VD and reboot system cause debugger to continues loop and want to run PR
13.MR5.6 Beta Firmware BST: MonTask: line 5911 in file ../../raid/pd.c
14.System hanged after pulling out drives from a 8Raid-6 array during OCR in Debian OS
15.Logically dead code
16.In printMrLdConfig(), pointer is checked against null but then dereferenced anyway
17.Firmware does not allow CacheCade VDs to be created
18.Fix For development tool Defects Reported
19."Assertion failure in ../../raid/mem.c at line 281" onissuing "adpdiag" from megacli-dos
20.Get_Time_Delta() has incorrect pointer increment
21.In configRaid, value returned from a function is not checked for errors before being used
22.Fix For development tool Defects Reported
23.Firmware asserted at raid/cache.c at line 3661 when VDs are offline
24.Timed critical boot message under UEFI mode not showing
25.MegaCli pdFwDownload fails on a SATA drive with an interposer
26.Wrong value returned for the field "CacheOffLoad" under the class "lsiesg_megaraidhbaadvancesoftware".
27.Firmware blocked firmware download to interposer
28.Punctured Block Logging Improvements
29.Fault LED behavior in OEM Blades
30.temporary patch.
31.Boot the system to iMR mode if NVRAM is not initialized.
32.We should not be directly unregistering the device from the DISM code. As, we do have a proper device removal state machine scheduled in the task list to do that.
33.A good SuperCap could be prematurely marked as failed.
34.FW goes to montask at cache offload.
35.MR2208 JBOD function can't handle the UNC error of SATA disk
36.after a learn cycle completed.
37.If a double bit error occurs during memory initialization on a OEM controller, GPIO 19 will now be asserted.
38.CSET: MR_DS3: all PDS missing after few rounds of enclosure pull/push run.
39.VD becomes WT with a good & new Super Cap on boot
40.Error Message "incompatible secondary iButton present!" or "BIOS handshaking With The FW,Wait" shown
41.SCSI Pass-Through to SAS SSD returns data but disk reported medium error
42.The SuperCap will now remain in the failed state when its capacitance falls below the minimum or its resistance exceeds the maximum
43.Cache offload would not work when a USB