Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Inspiron_3650_3250_Vostro_3650_3653_3250_3.8.0.exe
File size: 7.23 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 641058353d275716bf78c73af76c8398
SHA1: 175a2ef0c6e872db2b2713afc4a96faac147a3c8
SHA-256: 7da23c6f92cc958cfeaa26f850b4ded73b471871003c8bd6bca58701f64ae009
Fixes & Enhancements
Fixes:
- Firmware updates to address security advisory INTEL-SA-00185 (CVE-2018-12188 CVE-2018-12190 CVE-2018-12191 CVE-2018-12192 CVE-2018-12199 CVE-2018-12198 CVE-2018-12200 CVE-2018-12187 CVE-2018-12196 CVE-2018-12185).
Enhancements:
- N/A
Important Information
Do not power off the system until the process of updating BIOS has been done.
Supported Operating Systems
Installation instructions
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Run the BIOS update utility from Windows environment.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Run the BIOS update utility from DOS environment (Non-Windows users)
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Precision_5530_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Precision_5530_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes and reboot the system.
Applies to
Dell Inspiron 3653
Dell Vostro 3250
Dell Vostro 3650