Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: XPS_9360_2.16.0.exe
File size: 13.95 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 0ee8dcb2312d71d60888113afb4236f7
SHA1: 675a9bc999cc900ba44a784309644f916cd17030
SHA-256: 608a71aceda1777df503cf31525d65c81e91617390cf2df18a7eead80ace2df4
File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.
File Name: XPS_9360_2.16.0.rcv
File size: 13.95 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 0ee8dcb2312d71d60888113afb4236f7
SHA1: 675a9bc999cc900ba44a784309644f916cd17030
SHA-256: 608a71aceda1777df503cf31525d65c81e91617390cf2df18a7eead80ace2df4
Fixes & Enhancements
- Firmware updates to address the Intel Security Advisory INTEL-SA-00459 (CVE-2020-24507 and CVE-2020-8703).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00464 (CVE-2020-24512).
- Firmware updates to address security vulnerabilities.
Important Information
- Once the BIOS is upgraded, you cannot downgrade the BIOS EXE/Recovery (RCV) to versions earlier than 2.5.1 due to restrictions. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
- It is recommended to update the Thunderbolt 3 firmware to version 4.26.13.001 or later before upgrading BIOS to version 2.7.1 or later.
- It is recommended to update the Dell Thunderbolt Dock TB16 firmware to version 1.0.2 or later before upgrading BIOS to version 2.11.0 or later.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Supported Operating Systems
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ XPS_9360_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and XPS_9360_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.