Dell Wireless 360 Module with Bluetooth 2.0 + EDR Driver

Note: The Device Firmware Upgrade (DFU) utility will run automatically when you install this package to ensure that the Bluetooth module has correct version of firmware.
- You will need to ensure that you have AC Power connected in order for the DFU to run correctly.
- You will be prompted to connect AC Power if it is not connected.
- The AC Power is necessary to ensure that the notebook battery does not drain and power system off during the DFU process which could potentially leave the Bluetooth module in a corrupted state.

Hard Drive Installation (via WinZip) with Setup.exe File

Download

1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install

1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\Rxxxxx". (Where 'Rxxxx' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\Rxxxxx" (where 'Rxxxx" isthe name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.

Reboot will be required