Dell EMC Networking N2000 Series Firmware Version 6.6.0.24
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.6.0.24 as it contains multiple bug fixes.
New CPLD version 20 is available in release 6.5.1.1 and later (6.6.0.24) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.24), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.
****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.24 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.24 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.24.pdf" file.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.24_6.6.0.54_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf".
New CPLD version 20 is available in release 6.5.1.1 and later (6.6.0.24) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.24), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld
****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.24 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.24 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.24.pdf" file.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.24_6.6.0.54_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf".
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
FIELD-4848 CS00010067343 N1148 | 6.6.0.15 | media in Fiber slots showing "unknown" after few days
FIELD-4883 CS00010139205 DNSE/N1124P-ON/6.6.0.15/F-4883/Unable to set the ACL match rule to a class if ACL has more then one Rule
FIELD-4987 CS00010323786 DNSE/N2000/6.6.0.17 - Configuring description for a port from GUI causes the port to go down
FIELD-5037 CS00010386529 DNSE/N2048/6.6.0.10 - Error in GUI when trying to delete or edit vlan while the monitor session configuration is present
FIELD-5068 CS00010414469 DNSE/6.6.0.7 - N2000 - VLAN interface fails to release/renew dhcp address
FIELD-4870 CS00010237720 DNSE/N1500/6.6.0.15 - Intermittent ping loss to switch causing video application to fail over
FIELD-4977 CS00010282531 DNSE/N2048P/6.6.0.15 - N-series doesn't reply with agreement BPDU for the proposal BPDU in RPVST mode
FIELD-5163 CS00010536633 N2048P | 6.6.0.17 | Port Speed Changes When Config Applied From GUI
Enhancements:
None
Read MoreFIELD-4848 CS00010067343 N1148 | 6.6.0.15 | media in Fiber slots showing "unknown" after few days
FIELD-4883 CS00010139205 DNSE/N1124P-ON/6.6.0.15/F-4883/Unable to set the ACL match rule to a class if ACL has more then one Rule
FIELD-4987 CS00010323786 DNSE/N2000/6.6.0.17 - Configuring description for a port from GUI causes the port to go down
FIELD-5037 CS00010386529 DNSE/N2048/6.6.0.10 - Error in GUI when trying to delete or edit vlan while the monitor session configuration is present
FIELD-5068 CS00010414469 DNSE/6.6.0.7 - N2000 - VLAN interface fails to release/renew dhcp address
FIELD-4870 CS00010237720 DNSE/N1500/6.6.0.15 - Intermittent ping loss to switch causing video application to fail over
FIELD-4977 CS00010282531 DNSE/N2048P/6.6.0.15 - N-series doesn't reply with agreement BPDU for the proposal BPDU in RPVST mode
FIELD-5163 CS00010536633 N2048P | 6.6.0.17 | Port Speed Changes When Config Applied From GUI
Enhancements:
None
Version
6.6.0.24, A08
Release date
02 Jul 2020
Download Type
Firmware
Category
Network, Ethernet & Wireless
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: N2000v6.6.0.24.A08.zip
File Size: 179.96 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
66174fa224d49a344f5bee42b261ffda
SHA1:
dbe039e5bed24139fe9f71fa180ebd397d772f4e
SHA-256:
ed650675ff2a4c139c40c9814a2df7ff2e44935319a099de08ca87671631284b
File Format: A text file containing customer friendly fixes and enhancements information
File Name: N2000ReadMev6_6_0_24_A08.txt
File Size: 4.06 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
6a4a96884004d82d2bc4f14a0a2b81cf
SHA1:
f03f0120f9f963c85436befb40e8f9bb0e6430a6
SHA-256:
f2d492e5113b0306e10648a9ab03f603abb4e3157a8f88251f356889c9bc37ba
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Fixes:
FIELD-4848 CS00010067343 N1148 | 6.6.0.15 | media in Fiber slots showing "unknown" after few days
FIELD-4883 CS00010139205 DNSE/N1124P-ON/6.6.0.15/F-4883/Unable to set the ACL match rule to a class if ACL has more then one Rule
FIELD-4987 CS00010323786 DNSE/N2000/6.6.0.17 - Configuring description for a port from GUI causes the port to go down
FIELD-5037 CS00010386529 DNSE/N2048/6.6.0.10 - Error in GUI when trying to delete or edit vlan while the monitor session configuration is present
FIELD-5068 CS00010414469 DNSE/6.6.0.7 - N2000 - VLAN interface fails to release/renew dhcp address
FIELD-4870 CS00010237720 DNSE/N1500/6.6.0.15 - Intermittent ping loss to switch causing video application to fail over
FIELD-4977 CS00010282531 DNSE/N2048P/6.6.0.15 - N-series doesn't reply with agreement BPDU for the proposal BPDU in RPVST mode
FIELD-5163 CS00010536633 N2048P | 6.6.0.17 | Port Speed Changes When Config Applied From GUI
Enhancements:
None
FIELD-4848 CS00010067343 N1148 | 6.6.0.15 | media in Fiber slots showing "unknown" after few days
FIELD-4883 CS00010139205 DNSE/N1124P-ON/6.6.0.15/F-4883/Unable to set the ACL match rule to a class if ACL has more then one Rule
FIELD-4987 CS00010323786 DNSE/N2000/6.6.0.17 - Configuring description for a port from GUI causes the port to go down
FIELD-5037 CS00010386529 DNSE/N2048/6.6.0.10 - Error in GUI when trying to delete or edit vlan while the monitor session configuration is present
FIELD-5068 CS00010414469 DNSE/6.6.0.7 - N2000 - VLAN interface fails to release/renew dhcp address
FIELD-4870 CS00010237720 DNSE/N1500/6.6.0.15 - Intermittent ping loss to switch causing video application to fail over
FIELD-4977 CS00010282531 DNSE/N2048P/6.6.0.15 - N-series doesn't reply with agreement BPDU for the proposal BPDU in RPVST mode
FIELD-5163 CS00010536633 N2048P | 6.6.0.17 | Port Speed Changes When Config Applied From GUI
Enhancements:
None
Applies to
Dell N2024
Dell N2024P
Dell N2048
Dell N2048P
KIT,SWT BOX,24PRT,1GBE,N2024
Installation instructions
(1) Download the zip file - N2000v6.6.0.24.A08.zip
(2) Extract the image file "N2000Stdv6.6.0.24.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000 Series Switches From version 6.x.x.x to 6.6.0.24.pdf" extracted from zip file.
(2) Extract the image file "N2000Stdv6.6.0.24.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000 Series Switches From version 6.x.x.x to 6.6.0.24.pdf" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.