Dell PowerVault 132T Tape Library Firmware Package A11

Please view the installation instructions included with this firmware release for important information. This firmware update must be run on a computer system that is attached to the PowerVault 132T. The utilities included with this package only run in Windows operating systems. It is important that you power cycle the PowerVault 132T tape library and all systems connected to it once the firmware update has completed.

Note: When performing SCSI based drive firmware upgrades if Yosemite Tapeware 7.0 is installed on your server it must be closed and the following service: twunxsvc must be stopped. At the terminal type /usr/local/tapeware/twunxsvc x to stop the service. Then perform the firmware upgrade steps. To restart the service type /usr/local/tapeware/twunxsvc s. If the above steps are not taken then the devices will not be found by the firmware upgrade tool.

Hard Drive Installation (via WinZip) with HTML Pop-Up Window for
R143570.EXE

Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

Install
1.Double-click the new icon on the desktop labeled R143570.EXE.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R143570.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R143570 files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.