Dell XPS 13 9380 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : WVMJN

Importance : Critical

Version : 1.10.0, 1.10.0 Latest version Recommended version Latest and Recommended version

Release Date : 09 Apr 2020

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00307, INTEL-SA-00289, INTEL-SA-00240, INTEL-SA-00164, and INTEL-SA-00317. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: XPS_9380_1.10.0.exe

File size: 21.4 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 8baa2f8c55b23e99fa105cf0fe736d09

SHA1: af0f002273cd6cfacc3fbcad23322c2d5813527b

SHA-256: d94e20f03268855d57c99f2ab0b5ace87eaa593e7df5390eaa3847a978921bc9

Download .EXE

Fixes & Enhancements

Fixes:
- Firmware updates to address the Intel Security Advisory INTEL-SA-00307 (CVE-2019-14598).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00289 (CVE-2019-11157).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00317 (CVE-2019-14607).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00240 (CVE-2019-0151).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00164 (CVE-2019-0184).
- Fixed the issue where the system updates the BIOS continuously when the embedded controller firmware is upgraded or downgraded.

Enhancements:
- Updated the Realtek USB LAN firmware.

Important Information

- It is recommended to update the Intel graphics driver to version 25.20.100.6471 or later before upgrading the BIOS to version 1.1.1 or later.
- It is recommended to update the TB16 firmware to version 1.0.2 or later for the Dell Thunderbolt Dock TB16 before upgrading the BIOS to version 1.2.1 or later.
- It is recommended to update the ASMedia USB Extended Host Controller driver version to A13 1.16.56.1 or later before upgrading the BIOS to version 1.3.2 or later.
- Once the BIOS is upgraded to version 1.8.0 or later, you cannot downgrade it to version 1.7.0 or earlier. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell XPS 13 9380 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to